Metode Tuning Operating Range Fuzzy PID Controller pada Sistem Orde Tiga

Nana Sutarna(1), B. S. Rahayu Purwanti(2),


(1) Jurusan Teknik Elektro, Politeknik Negeri Jakarta
(2) Jurusan Teknik Elektro, Politeknik Negeri Jakarta

Abstract

This research discusses the development of a model Fuzzy Proportional, Integral, Derivative (Fuzzy PID) controller models and self-tuning. This method has been implemented in the third-order system of Differential Equations, as a sample implementation of a PID controller. The methods self-tuning known are fuzzy rules, membership function (MF), and scaling factor. The focus of the discussion in this research is to introduce self-tuning to the operating range (OR) setting of MF. Previous research has succeeded in converting a PID controller to a Fuzzy Logic Controller (FLC) which is in accordance with the PID structure. The FLC has three inputs and one output as in the PID controller, hereinafter referred to as Fuzzy PID controller. Knowledgebase on the FLC structure of three inputs one output is expressed in the form of cubic fuzzy associative memory (FAM). The conversion was done by mapping errors, integrals error, derivative errors and outputs of PID controller into the OR of MF Fuzzy input/output. The size of the OR conversion value on the MF fuzzy input was set, so the response transient is set-to-point. While the OR value of the MF fuzzy output was fixed as a limitation. Improved settling time was reached up to 75.3% and percent overshoot was reduced by 57.7% in Fuzzy PID with PID controller. The output signal from the Fuzzy PID controller showed the smallest amplitude of 24.12, while the PID controller was 32.53. The amplitude unit depends on the Fuzzy PID controller parameters when it applied the real plant. The third-order Fuzzy PID controller has been successfully simulated in Simulink/Matlab.

Keywords

PID; Fuzzy PID; operating range; third order system

Full Text:

PDF

References

A. H. Halim and I. Ismail, “Tree Physiology Optimization tuning rule for Proportional-Integral control,†in MATEC Web of Conferences, 2017, vol. 131, p. 3018.

Z. Salleh, M. Sulaiman, and R. Omar, “Tuning fuzzy membership functions to improve performance of vector control induction motor drives,†J. Telecommun. Electron. Comput. Eng., vol. 8, no. 2, pp. 1–4, 2016.

J. Yin, D. Zhu, J. Liao, G. Zhu, Y. Wang, and S. Zhang, “Automatic Steering Control Algorithm Based on Compound Fuzzy PID for Rice Transplanter,†Appl. Sci., vol. 9, no. 13, p. 2666, 2019.

Y. Qin, L. Sun, Q. Hua, and P. Liu, “A fuzzy adaptive PID controller design for fuel cell power plant,†Sustainability, vol. 10, no. 7, p. 2438, 2018.

W. Hao and J. Kan, “Application of self-tuning fuzzy proportional–integral–derivative control in hydraulic crane control system,†Adv. Mech. Eng., vol. 8, no. 6, p. 1-10, 2016.

W. Gubara, M. Elnaim, and S. F. Babiker, “Comparative study on the speed of DC motor using PID and FLC,†in 2016 Conference of Basic Sciences and Engineering Studies (SGCAC), 2016, pp. 24–29.

O. Ibrahim, S. A. Y. Amuda, O. O. Mohammed, and G. A. Kareem, “Performance Evaluation of three PID Controller Tuning Algorithm on a process plant,†Int. J. Electr. Comput. Eng., vol. 5, no. 5, 2015.

N. Allu and S. Salu, “Aplikasi Penalaan Dengan Metode Ziegler Nichols di Perancangan Penpendali PID pada Putaran Motor DC,†in Prosiding Seminar Nasional Sinergitas Multidisiplin Ilmu Pengetahuan dan Teknologi, 2018, vol. 1, pp. 203–207.

R. Kumar, S. K. Singla, and V. Chopra, “Comparison among some well known control schemes with different tuning methods,†J. Appl. Res. Technol., vol. 13, no. 3, pp. 409–4015, 2015.

J. M. S. Ribeiro, M. F. Santos, M. J. Carmo, and M. F. Silva, “Comparison of PID controller tuning methods: analytical/classical techniques versus optimization algorithms,†in 2017 18th international Carpathian control conference (ICCC), 2017, pp. 533–538.

N. Pitalúa-Díaz, E. J. Herrera-López, G. Valencia-Palomo, A. González-Angeles, R. A. Rodríguez-Carvajal, and N. R. Cazarez-Castro, “Comparative Analysis between Conventional PI and Fuzzy LogicPI Controllers for Indoor Benzene Concentrations,†Sustainability, vol. 7, no. 5, pp. 5398–5412, 2015.

D. O. Njoku, A. O. Agbakwuru, I. A. Amaefule, and I. S. Onyema, “Application and Implementation of Fuzzy Logic Controller (FLC) for Feed Chemical Concentration Process,†transport, vol. 2, pp. 16-19, 2018.

F. A. Bakri, M. Y. Mashor, S. M. Sharun, S. N. B. Sarpinah, and Z. A. Bakar, “Adaptive fuzzy logic controller with direct action type structures for InnoSAT attitude control system,†in IOP Conference Series: Materials Science and Engineering, 2016, vol. 152, no. 1, p. 12032.

J. A. Bala, O. M. Olaniyi, T. A. Folorunso, and O. T. Arulogun, “Poultry Feed Dispensing System Control: A Case between Fuzzy Logic Controller and PID Controller,†Balk. J. Electr. Comput. Eng., vol. 7, no. 2, pp. 171–177, 2019.

V. T. Aghaei and A. Onat, “Tuning scaling factors of fuzzy logic controllers via reinforcement learning policy gradient algorithms,†in Proceedings of the 3rd International Conference on Mechatronics and Robotics Engineering, 2017, pp. 146–151.

W. Gritli, H. Gharsallaoui, and M. Benrejeb, “PID-type fuzzy scaling factors tuning using genetic algorithm and simulink design optimization for electronic throttle valve,†in 2016 International Conference on Control, Decision and Information Technologies (CoDIT), 2016, pp. 216–221.

A. M. Najar and D. K. Arif, “Comparison between PID controller and fuzzy sliding mode control (FSMC) on super heater system,†in Journal of Physics: Conference Series, 2019, vol. 1218, no. 1, p. 12055.

A. Kharidege, D. Jianbiao, and Y. Zhang, “Performance Study of PID and Fuzzy Controllers for Position Control of 6 DOF arm Manipulator with Various Defuzzification Strategies,†in MATEC Web of Conferences, 2016, vol. 77, p. 1011.

J. Dong and B. He, “Novel fuzzy PID-type iterative learning control for quadrotor UAV,†Sensors, vol. 19, no. 1, p. 24, 2019.

A. Pappachen and A. P. Fathima, “BFOA based FOPID controller for multi area AGC system with capacitive energy storage,†Int. J. Electr. Eng. Informatics, vol. 7, no. 3, p. 429, 2015.

Z. Chen and J. Qu, “Control of suspended low-gravity simulation system based on self-adaptive fuzzy PID,†in IOP Conference Series: Materials Science and Engineering, 2017, vol. 231, no. 1, p. 12070.

Y. Tao et al., “Fuzzy PID control method of deburring industrial robots,†J. Intell. Fuzzy Syst., vol. 29, no. 6, pp. 2447–2455, 2015.

S. Zhang, Y. Zhang, X. Zhang, and G. Dong, “1888. Fuzzy PID control of a two-link flexible manipulator.,†J. Vibroengineering, vol. 18, no. 1, 2016.

C.-T. Chao, N. Sutarna, J.-S. Chiou, and C.-J. Wang, “Equivalence between fuzzy PID controllers and conventional PID controllers,†Appl. Sci., vol. 7, no. 6, p. 513, 2017.

C.-T. Chao, N. Sutarna, J.-S. Chiou, and C.-J. Wang, “An Optimal Fuzzy PID Controller Design Based on Conventional PID Control and Nonlinear Factors,†Appl. Sci., vol. 9, no. 6, p. 1224, 2019.

K. Yan and H. Mo, “Application of fuzzy control under time-varying universe in unmanned vehicles,†in 2018 33rd Youth Academic Annual Conference of Chinese Association of Automation (YAC), 2018, pp. 439–444

Refbacks

  • There are currently no refbacks.