Impact of Work Accident Rate on Construction Safety Management System: A Case Study in Sidoarjo, Indonesia
DOI:
https://doi.org/10.15294/jtsp.v28i1.47264Keywords:
Zero Accident, Construction Safety Management System, Accident Work RateAbstract
Zero Accident is a concept that aims to eliminate work accidents by implementing an effective Construction Safety Management System (CSMS) in accordance with applicable regulations. The CSMS is very important for creating safety and security for all parties involved, as well as the work environment. However, during implementation, many contractors do not adhere to the applicable rules and guidelines; therefore, this research was conducted to examine how the current occupational safety management system is implemented in the field. This study focuses on the results of the analysis of the accident work rate in the Sidoarjo Integrated Central Building construction project. Based on the results of the analysis, it was found that the contractor's commitment to implement the work safety plan had a great impact on the implementation of the construction safety management system of this project, even obtained, with 0 Frequency Severity Indicator per 1,000,000 working hours of people, successfully implemented by the contractor. This result allows the work to be implemented simultaneously in accordance with the plan, on time, with quality, and at cost, because there are no work accidents that affect it, and the contractor can avoid negative costs associated with them.
Downloads
References
[1] Almustofa, R., & Rahardja, E. (2014). Pengaruh Lingkungan Kerja, Motivasi Kerja, Disiplin Kerja Terhadap Kinerja Pegawai (Studi Pada Pegawai Perum Bulog Divisi Regional Jakarta) (Doctoral dissertation, Fakultas Ekonomika dan Bisnis).
[2] Badaruddin, S. et al. (2024) ‘Penerapan Sistem Manajemen Keselamatan Konstruksi Pada proyek renovasi Gedung Kelas internasional Fakultas Kedokteran Universitas Hasanuddin’, Journal of Applied Civil and Environmental Engineering, 3(2), pp. 42– 53. doi:10.31963/jacee. v3i2.4620.
[3] Defila, S., S, K., & S, K. (2023). The Effect of Implementation of Construction Safety Management Sytem on The Level of Work Accidents. LOGIC: Jurnal Rancang Bangun dan Teknologi. https://doi.org/10.31940/logic.v23i2.68-76.Ihsan, T., Hamidi, S. A., & Putri, F. A. (2020). Penilaian risiko dengan metode HIRADC pada pekerjaan konstruksi gedung kebudayaan Sumatera Barat. Jurnal Civronlit Unbari, 5(2), 67-74.
[4] Fountas, Grigorios & Anastasopoulos, Panagiotis & Abdel-Aty, Mohamed. (2018). Analysis of accident injury- severities using a correlated random parameter ordered probit approach with time variant covariates. Analytic Methods in Accident Research. 18. 57-68. 10.1016/j.amar.2018.04.003.
[5] Latuconsina, J. H. (2021). Analisis Pengaruh Penerapan Keselamatan Dan Kesehatan Kerja Terhadap Kinerja Pekerja Konstruksi Pada Proyek Pembangunan Terminal LPG Pressurized Wayame Ambon.
[6] Maretnowati, Reszzah & Azizi, Amris & Anjarwati, Sulfah. (2020). ANALISIS PELAKSANAAN KESELAMATAN DAN KESEHATAN KERJA (K3) PADA PROYEK PEMBANGUNAN GEDUNG K
UNIVERSITAS MUHAMMADIYAH PURWOKERTO. CIVeng: Jurnal Teknik Sipil dan Lingkungan. 1. 10.30595/civeng. v1i2.9298.
[7] Martino, P., Rinawati, D. I., & Rumita, R. (2015). Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment and Risk Control (HIRARC) di PT. Charoen Pokphand Indonesia Semarang. Industrial Engineering Online Journal, 4(2).
[8] Muflihah, A.Muflihah & Nurazizah, & Wahyu, Atjo & Yusbud, Mahfuddin & Abadi, Muh. (2024). IMPLEMENTASI SISTEM MANAJEMEN KESELAMATAN KONSTRUKSI (SMKK) PADA PROYEK
PEMBANGUNAN RS UPT VERTIKAL MAKASSAR TAHUN 2023. Public Health and Medicine Journal. 2. 63-70. 10.59583/pama. v2i2.110.
[9] Pangestika, Elza. (2023). Implementasi Peraturan Keselamatan dan Kesehatan Kerja (K3) pada Proyek Pembangunan Perumahan di Wilayah DIY. Jurnal Hukum Sasana. 9. 31- 40. 10.31599/sasana. v9i1.1245.
[10] Putra, W., & Saraswati, R. (2023). Analisis Implementasi Sistem Manajemen Keselamatan Konstruksi (SMKK) (Studi Kasus Pembangunan Gedung Kantor Pengadilan Negeri Sungguminasa Kelas 1a). Journal on Education. https://doi.org/10.31004/joe.v5i3.1546.
[11] R. A. Saraswati and W. D. Putra, “Analisis Pengaruh Pengetahuan K3 terhadap Perilaku Pekerja Konstruksi (Studi Kasus: Proyek Preservasi Jalan dan Jembatan Ruas Jalan Perintis Kota Makassar),” J. Educ., vol. 5, no. 4,
pp. 11734–11739, 2023, doi: 10.31004/joe. v5i4.2130.
[12] R. O. P. Ningsih, “Analisis Penerapan Keselamatan Dan Kesehatan Kerja (K3) Pada Proyek Konstruksi Bangunan Tinggi di Wilayah Kecamatan Banyumanik,” Skripsi Progr. Stud. Tek. Sipil, Jur. Tek. Sipil, Fak. Tek. Univ. Negeri Semarang, pp. 1–48, 2020.Safitri, S. (2021). Analisis Penerapan Audit Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di PT United Tractors Tbk Surabaya (Doctoral dissertation, Stikes Bhakti Husada Mulia Madiun).
[13] Saputra, C. D., & Surahmi, M. (2022). Tanggung Jawab Para Pihak Dalam Kontrak Kerja Konstruksi Menurut Undang-Undang Tentang Jasa Konstruksi. Repertorium: Jurnal Ilmiah Hukum Kenotariatan, 11(2), 186-195.
[14] Soputan, G. E., Sompie, B. F., & Mandagi, R. J. (2014). Manajemen Risiko Kesehatan Dan Keselamatan Kerja (K3) (StudI Kasus Pada Pembangunan Gedung Sma Eben Haezar). Jurnal Ilmiah Media Engineering, 4(4).
[15] Toaha, A., Yulia, M., Babo, D. H. P., Okvitasari, A. R., Hudha, M. I., Aprilliani, C., ... & Mansida, A. (2023).
Sistem Manajemen K3. Get Press Indonesia
[16] V. Zulkarnain, D. A. Saputra, N. H. Yahya, M. S. Aditya, and D. O. Radianto, “Analisis Penerapan Manajemen Keselamatan dan Kesehatan Kerja (K3) Pada Proyek Konstruksi Di Indonesia,” J. Student Res., vol. 1, no. 4, pp. 157–167, 2023, [Online]. Available: https://ejurnal.stie-trianandra.ac.id/index.php/jsr/article/view/1480/1248
