Jurnal Bahan Alam Terbarukan

Jurnal Bahan Alam Terbarukan starting in 2024 migrates to better secure from various unwanted things, including journal hacking and so on. To submit, the author please visit the new website page of our journal at the link https://journal.unnes.ac.id/journals/jbat

MIGRATION OFFICIAL STATEMENT HERE

Jurnal Bahan Alam Terbaurkan is a scientific journal which is focusing on the research, development and applications in biomass conversion processes (thermo-chemical conversion; physicochemical conversion and bio-chemical conversion) and equipment to produce fuels, power, heat, and value-added chemicals from biomass. Since 2012, JBAT published 2 issues per year i.e. in June and December. From 2012 to 2016 we published JBAT in Indonesian and English. However, since June 2016 JBAT has only published articles in the English language and continues till now. In 2016, JBAT has been accredited by the Directorate General of Research Empowering and Developments, Ministry of Research, Technology and Higher Education through SK 36b/E/KPT/2016 for the period of 2016-2021. In 2020, JBAT has been accredited as SINTA 2 by the Ministry of Research and Technology with issue coverage until Vol. 14 No. 2 (2024). JBAT has a printed and online standard serial number which is p-ISSN 2303-0623 (printed version) and e-ISSN 2407-2370 (electronic version). As an accredited journal, JBAT is conducting journal management online including submission, review process and publication. Jurnal Bahan Alam Terbaurkan is published by Chemical Engineering Department, Universitas Negeri Semarang and has collaboration with APTEKIM (Asosiasi Pendidikan Tinggi Teknik Kimia Indonesia), EIC (Engineering International Conference) and SNTK (Seminar Nasional Teknik Kimia) UNNES.

JBAT has been indexed in:

Vol 12, No 2 (2023): December 2023 [Nationally Accredited Sinta 2]

Articles

	Development of Microbial Fuel Cell in Tofu Liquid Waste in Producing Clean Energy Ansia Tiara, Safira Redzy Ramadhani, Abubakar Tuhuloula	PDF 97 - 104
	The Effects of Raw Material Ratio and Calorific Value on Gasification Rate from Co-Gasification of Coal and Biomass (Bagasse) Muhammad Harry Kurniansyah, Abu Hasan, Aida Syari	PDF 105 - 111
	Cellulose Isolation and Characterization of Green Seaweed C. Lentillifera from Halmahera, Indonesia Puji Rizana Ayu Mentari, Ilham Andreansyah, Putri Amanda, Resti Marlina, Suharti Suharti, Siti Agustina, Firda Aulya Syamani	PDF 112 - 119
	Synthesis of Biofoam from Cassava Peel Starch, Banana Peel Starch and Chitosan as Additives Yuli Darni, Eva Mayanti, Ghea Maulidaco Anandati, Simparmin Br. Ginting, Lia Lismeri, Panca Nugrahini, Herti Utami	PDF 120 - 128
	Process of Bacterial Cellulose Production from Tofu Wastewater Without Pretreatment Using Acetobacter xylinum Margono Margono, Nur Isnaeni, Vika Amelia, Esa Nur Shohih	PDF 129 - 136
	Optimization of Bioethanol Production by Enzymatic Hydrolysis and Fermentation From Rind Cocoa Fruit (Theobroma Cacao L) Abd. Karim, Nur Umriani Permatasari, St. Namira Ananda	PDF 137 - 146
	Kinetic Study of Non-Isothermal Reactions on the Pyrolysis of Various Biomass Waste by using Thermogravimetric Data Haniif Prasetiawan, Dewi Selvia Fardhyanti	PDF 147 - 157
	Syngas Production from Updraft Co-Gasification Process Using Compost, Coffee Husk, and Coal as a Raw Materials Heny Dewajani, Windi Zamrudy, Ariani Ariani, Anang Arianto, Muhammad Nur Abror Falah	PDF 158 - 165
	Green Synthesis Of Silver Nanoparticles Using Ketapang Leaf Extract (Terminalia Catappa L.) Assisted By Ultrasound Husna Syaima, Noor Hindryawati, Irfan Ashari Hiyahara, Teguh Wirawan, M. Syaiful Arief, Nanang Tri Widodo, Atika Aulia Ahmad, Gaanty Pragas Maniam	PDF 166 - 173

Focus and Scope

The scope of the journal encompasses the following:
Conversion of Biomass into heat, electricity and biohydrogen; Bioenergy system and plant engineering; Biocatalyst development, gasification and pyrolysis plants; Commodity Chemicals; Specialty Chemicals; Feed/Food & Additives; Light Oxygenates; Phenols & Aromatics; Adhesives & Lubricants; Pharmaceutical; Fibrous Products; Plastics & Synthetic Fuels Sustainable production of annual and wood feedstock from agriculture; Creation of new biomass feedstocks in laboratories; Biochemical conversion techniques; Thermochemical conversion techniques; Fermentation, anaerobic digestion and enzyme development; Storage and transportation of biomass during manufacture; Implementation, improved efficiency and reduced environmental impact of first generation biofuel, including bioethanol and biodiesel; New bioenergy sources

JBAT accepts original research papers or any other original contribution in the form of reviews and reports on natural resources related research.

Submission

Online Submissions

Registration and login are required to submit items online and to check the status of current submissions.

Already have a Username/Password for Jurnal Bahan Alam Terbarukan?

Go to Login Start New Submission

Need a Username/Password?

Go to Registration

Author Guidelines

General Information

Journal is published twice a year; the number of the volumes will vary. Journal will be produced after going through reviewing process from the board of editor. Staring from JBAT Vol 6 No 1, we only published article in english language. The article could be based on research, scientific studies, and analysis as well as the solution which are relevant with the field of chemical engineering, especially about renewable resources. The article should never been published before.

Specific Information

Article should be written in A4 paper. The article should be without any page numbering and composed as follows : Abstract, Introduction, Research Methodology ( or Model Development), Result and Discussion, Conclusion, Acknowledgements (if any), List of Notation (if any), and Bibliography

Article begins with title using font 17 pt UPPER CASE format. Name of the author written under the title using font 13 pt without any academic degree. Apostrophe put behind the name of the author using superscript format. The name of the institution (name of the institution, address, phone number, fax number, and e-mail) written under the name of the author using Times New Roman 8pt. Should there are more than one author, please add the e-mail address of the corresponding author. The title of the article, name of the author and name of the institution written in the center of the field. Space between title and the name of the author is one single space 12 pt and the space between the name of the author and the name of the institution is one single space 8 pt.

Abstract

Abstract should be written in English, ranging between 200Â 300 words. The title of the abstract should be written in the center of the field using regular font 9 pt bold. The space between the title of the abstract and the name of the institution is one single space 10 pt. The space between the text of the abstract and the title is one single space 11 pt. The abstract is written using regular font 9 pt in a single column format. Keywords are written below the text of the abstract, arranged alphabetically and separated by comma. The title of the keywords should be written using italic font 8 pt, while the keywords should be written using regular font 8 pt.

Content

Content of the article should be written left aligned with the left margin 3 cm, right margin 3 cm, bottom margin 3,98 cm and top margin 3,98 cm. The space between header and the adge of the paper is 20 mm, and the space between footer and the edge is 13 mm.The article should be written using MS Word using Times New Roman using 12 pt font, 1.5 space and in a single column format. Each article should be no more than 20 pages (including pictures and tables) justified, and should end in an even page number.

Sub Heading

Sub Heading should be written in bold letter using UPPER CASE format, aligned to the left, and numbered. Sub sub heading should be written using bold letter, aligned left without number and underline.

Pictures and Tables

Pictures and tables placed in a text with description. Pictures and tables is followed by the title of the picture placed just below the picture and the title of the table placed above the table. The title of the table and picture should be numbered. The picture should be able to be clearly printed. Pictures or diagrams/ schemes placed in the text or if the picture is too big, it can be placed in the middle of the page. The picture should not be framed. The displayed tables are without vertical line, whereas horizontal lines can only display 3 main horizontal lines which are 2 horizontal lines for column title and closing line from the bottom line.

Equation

Equation should be written left aligned and numbered in the brackets. The numbers placed at the end of the right margin of the column.

List of Notation

List of Notation arranged alphabetically. Notation of latin alphabet should be written first followed by Arabic alphabet.

Quotation

Quotation writing of an article should be written using Harvard system. The source is written in the description consists of the name of the author and the year of publication. Example: Hidrolisis lignoselulosa dapat dilakukan dengan enzim dan kimia (Megawati, 2009 for one authors; Megawati & Rengga, 2011 for two authors and Rengga et al., 2010 for three or more authors). According to Damayanti (2008),

Bibliography

Bibliography should be arranged alphabetically without any numbering and the space between each item 1.5 space. The rules of the bibliography writing are as follows:

Garside, J., Al-Dibouni, M.R. 1998.Velocity-Voidage Relationships for Fluidization in Solid-Liquid System. Industrial Engineering Chemistry Process Design and Development. 16:206-214.

Molerus, O. 1993.Principles of Flow in Disperse Systems. 1st Ed. Chapman & Hall. London.

Setyawan, H. 1996.Flow Patterns of CoalÂ Water Moxture in an Agitated Tank. Master Thesis. Tokyo Institute of Technology. Tokyo. Japan.

Primack, H.S. 1983.Method of Stabilizing Chelated Polyvalent Metal Solutions. U.S. Patent No. 4,455,287. Issued 19 June 1984.

Hovmand, S. 1995.Fluidized Bed Drying, in A.S. Mujumdar (Ed.). Handbook of Industrial Drying, 2nd Ed. Marcel Dekker. New York. 195-248.

Sasaki, K. Noparatnaraphorn, N., Nagoi, S. 1991.Use of Photosynthetic Bacteria for The Production of SCP and Chemicals from Agro Indusrial Waste.in Martin, AM (Ed.) Bioconversion of Waste to Industrial Product. Elviser Applied Science. London. 225-233.

Copyright Notice

This journal is licensed under a Creative Commons Attribution 4.0 International License.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

##manager.payment.authorFees##

This journal charges the following author fees.

Article Submission: 0.00 (IDR)

Fast-Track Review: 0.00 (IDR)

Article Publication: 1000000.00 (IDR)
Jurnal Bahan Alam Terbarukan is an open access international journal. As an Open Access journal with no subscription charges, a fee is payable by the author or research funder to cover the costs associated with publication. This ensures your article will be immediately and permanently free to access by everyone. Since manuscript submission years 2016, Authors should pay some processing fees.
The open access publication fee for this journal is Rp. 1.000.000,- per accepted article for up to 15 journal pages. This fee is for article processing and DOI maintenance once their articles has been accepted.