Prototype Mesin Pengantar Barang Otomatis Menggunakan Load Cell Berbasis Robot Line Follower

Dwi Budi Susilo(1), Hari Wibawanto(2), Anggraini Mulwinda(3),


(1) Universitas Negeri Semarang Kampus Sekaran, Gunungpati, Semarang, 50229, Indonesia;
(2) Jurusan Teknik Elektro, Fakultas Teknik, Universitas Negeri Semarang
(3) Jurusan Teknik Elektro, Fakultas Teknik, Universitas Negeri Semarang

Abstract

Overloaded condition in the product porter like hand pallet, hand stacker, forclift, and etc, can causes damage and terrible accident in the machine operator. This research aim to build a prototype of porter machine that can prevent overloaded condition through the reading of load cell and photo diode sensor to guide the line follower direction. Research and development methods are used with the systematic writing are background of study and problems, prototype design and validation, testing, taking and analysis of the data. Output of the research is a prototype of porter machine using load cell sensor based on line follower robot. The Result of the load cell reading is compared to SF-400 weigher, and found the difference amount 0.117%. The load testing data of automatic moving trigger is 1 gram until 2999 gram. The Overload condition warning is active while the load is more than 3000 gram. The data reading of the photo diode on the black line is running succesfully, however on the white line with orange color is found some error.

Keywords

prototype; line follower; load cell; foto dioda

Full Text:

PDF

References

Peraturan Menteri Perindustrian Republik Indonesia (PERMENPERIN) Nomor: 11/M-IND/PER/3/2014 Pasal 1 Ayat 1. Program Restrukturisasi Mesin dan/ atau Peralatan Indstri kecil dan menengah.

H. L. Suwarno, Sembilan Fungsi Saluran Distribusi : Kunci Pelaksanaan Kegiatan, Jurnal Managemen 6(1), pp. 79–87, 2006.

P. Simanungkalit, R. Yasra, dan B. W. Widiodo, Perencanaan Sistem Perawatan Alat Angkat Kapasitas 5 Ton dengan Metode Preventive Maintenance (Studi Kasus Pt . Trikarya Alam) The Maintenance System Planning Of Lift Tool With Capacity 5 Ton Using Preventive Maintenance Method (Case Study Pt . Trikarya Alam), Profisiensi 4(1), pp. 47–57, 2016.

Peraturan Menteri Tenaga Kerja Republik Indonesia Nomor:PER.05/MEN/1985 Pasal 73 ayat 2 Tentang Pesawat Angkat dan Angkut.

T. D. Rawis, Perencanaan Biaya Keselamatan dan Kesehatan Kerja ( K3 ) pada Proyek Konstruksi Bangunan (Studi Kasus : Sekolah St . Ursula Kotamobagu), Jurnal Sipil Statik 4(4), pp. 241–252, 2016.

T. Santoso, Rancang Bangun Kualifikator Susu Sapi Berbasis Mikrokontroler, 2016.

A. L. Khakim dan S. Purbawanto, Rancang Bangun Alat Timbang Digital Berbasis AVR Tipe Atmega32, Jurnal Teknik Elektro, 7(2), 76-80, 2017.

A. Z. Falani dan S. Budi, Robot Line Follower Berbasis Mikrokontroler Atmega 16 dengan Menampilkan Status Gerak Pada LCD. e-jurnal Narodroid 1(1), 2015.

O. Gumus, M. Topaloglu, dan D. Ozcelik, The Use of Computer Controlled Line Follower Robots in Public Transport, Procedia Computer Science, The Author(s), 102(August), pp. 202–208, 2016, doi: 10.1016/j.procs.2016.09.390.

A. Nur, P. Sihombing, dan D. Sitompul, Prototipe Robot Line Follower untuk Simulasi Taksi Wisata Otomatis Kota Medan Menggunakan Algoritma Fuzzy, Jurnal USU pp. 2–7.

C. Indriyanto, dan P. Sihombing, Implementasi Algoritma Fuzzy Logic Pada Robot Autopilot Line Follower Berbasis Implementasi Algoritma Fuzzy Logic pada Robot Autopilot Line Follower Berbasis Mikrokontroler ATMega32A (Studi Kasus : Miniatur Bus Lintas USU), Reserch Gate, 2016, doi: 10.13140/RG.2.2.16311.11688.

Yultrisna, Rancang Bangun Robot Solving Maze Dengan Algoritma Depth, Jurnal Momentum 15(2), pp. 87–93, 2013.

Datasheet HX711, 24-Bit Analog-to-Digital Converter (ADC) for Weigh Scales, AVIA Semiconductor, 2014.

H. Andrianto dan A. Darmawan, Arduino Belajar Cepat dan Pemrograman, Bandung : Informatika Bandung, 2016.

N. A. Pratama dan T. Andrasto, Komunikasi Pada Robot Swarm Pemadam Api Menggunakan Protokol ModBus. Jurnal Teknik Elektro 6(2), 2013.

Datasheet VNH2SP30, VNH2SP30-E Automotive fully integrated H-bridge motor driver. www.st.com, pp. 1–33, 2013.

D. A. N Janis, et al., Rancang Bangun Robot Pengantar Makanan Line follower. ejurnal teknik elektro dan komputer pp. 1–10, 2014.

Ng, K. Hooi. et al., Adaptive Phototransistor Sensor for Line Finding, 41(Iris), pp. 237–243, 2012, doi: 10.1016/j.proeng.2012.07.168.

K. A. Vignesh et al., Computer Vision Assisted Line Followin Robots, Procedia 38, pp. 1764–1772, 2012, doi: 10.1016/j.proeng.2012.06.215.

Refbacks

  • There are currently no refbacks.