Development of Job Instruction on Student Readiness in Carrying out Internship in the Automotive Engineering Skill Competency

Dewi Pujining Nugraheni(1), Basyirun Basyirun(2), Eko Supraptono(3),

DOI: https://doi.org/10.15294/jvce.v7i1.40352


(1) SMK Negeri 1 Kaligondang
(2) Pascasarjana Universitas Negeri Semarang
(3) Pascasarjana Universitas Negeri Semarang

Abstract

One of the Ministry of Education and Culture strategies to realize quality and industry-recognized vocational education and training for the Industrial Revolution 4.0 is to provide opportunities for students to carry out industrial work practices or project work with business and industrial world (DU/DI). In practice, vocational students in automotive engineering skill competency tend to be unprepared which results in ineffective internships. This development research aims to formulate the need for job instruction which is oriented toward the readiness of students to carry out an internship program in which there are basic components of instruction and preparation, understanding, testing and participation stages, and follow-up. The readiness of students includes knowledge, skills, and attitudes. Research development uses the ADDIE development model procedure, namely (1) Analysis, (2) Design (3) Development, (4) Implementation, (5) Evaluation. This study aims to: 1) Develop job instruction, 2) Know the feasibility of job instruction, 3) Know the effectiveness of job instructions; 4) Know the increase in student readiness before carrying out internships. The feasibility test obtained a score of 3.63% with a very feasible category. Practicality of 92% with a very practical category. The job instruction that was developed was also tested for its effectiveness with an N-Gain value of 78% which means it is effective and the result is a student readiness level of 84.47% in the ready category. The results of this development research show that job instruction has a positive effect on student readiness and can be used at the stage of industrial work practice debriefing of Automotive Engineering Skill Competency.

Keywords

job instruction; industrial work practices; readiness of students

Full Text:

PDF

References

Atmawati, A., Samsudi, S., & Sudana, I. M. (2017). Keefektifan Pelaksanaan Praktek Kerja Lapangan Berbasis Industri pada Kompetensi Keahlian Teknik Audio Video. Journal of Vocational and Career Education, 2(2). https://doi.org/10.15294/jvce.v2i2.13809

Azizah, K., Karend, A., Sutopo, Y., & Widjanarko, D. (2020). Journal of Vocational Career Education. 5(186), 140–148.

Azwar, S. (2014). Metode Penelitian.

Dabet, A., Syahputra, A., Nasrah, S., Pendidikan, S., Teknik, V., Universitas, M., Studi, P., Administrasi, M., Universitas, P., Studi, P., Matematika, P., Malikussaleh, U., Studi, P., Bahasa, P., & Universitas, I. (2022). The Effect of Work Preparation Sheet Learning Media on Learning Outcomes of Turning Practice into Machining Practice in Vocational High Schools A . Introduction Vocational High School ( SMK ) is one of the vocational education institutions that have the t. 9, 100–115. https://doi.org/10.32505/tarbawi.v9i1.4232

De Jong, J. A., & Versloot, B. (1999). Structuring On‐the‐job Training: Report of a Multiple Case Study. International Journal of Training and Development, 3(3), 186–199. https://doi.org/10.1111/1468-2419.00077

DeVaughn, P. (2022). Integrating Evaluation in Instructional Design Practice. In The Instructional Design Trainer’s Guide.

Gold, L. S. (1982). Job instruction: Four steps to success. IEEE Transactions on Professional Communication, 1, 26-30.

Golfashni, N. (2011). Validity and Reliability in Social Science Research. Education Research and Perspectives, 38(1), 105–123.

Hossain, M. M., Alam, M., Alamgir, M., & Salat, A. (2020). Factors affecting business graduates’ employability–empirical evidence using partial least squares (PLS). Education and Training, 62(3), 292–310. https://doi.org/10.1108/ET-12-2018-0258

Knight, D. (1997). Assessing Job-Readiness Skills o w S t u d e n t s , T e o d i e i s , a n d E m p b y e s i C a n W o r c i o g e t h e r t o E n h a n c e 0 n i e o b T r a n i n i g.

Kuat, T., & Kristiyanto, N. A. (2020). Analisis Pelaksanaan Prakerin Pada Kompetensi Keahlian Teknik Kendaraan Ringan Otomotif Smk. Jurnal Pendidikan Ilmu Sosial, 30(1), 11–18. https://doi.org/10.23917/jpis.v30i1.10888

Kurniawati, A., & Arief, S. (2016). Pengaruh Efikasi Diri, Minat Kerja, Dan Bimbingan Karir Terhadap Kesiapan Kerja Siswa SMK Program Keahlian Akuntansi. Economic Education Analysis Journal, 5(1), 363–376.

Lestari, I., & Siswanto, B. T. (2015). Pengaruh pengalaman prakerin, hasil belajar produktif dan dukungan sosial terhadap kesiapan kerja siswa SMK. Jurnal Pendidikan Vokasi, 5(2), 183–194. https://doi.org/10.21831/jpv.v5i2.6384

Meier, D. P., & Liker, J. K. (2005). Toyota talent.

Nazir, M. M., & CIA, C. J. D. B. R., K. (2005). E. I. in O. R. 99-113. (2005). ERP Implementation in Oil Refineries. 99–113.

Novita, D. I. (2022). Pengaruh Pengalaman Praktek Kerja Industri dan Motivasi Kerja Terhadap Kesiapan Kerja Siswa. Http://Ejournal.Unp.Ac.Id/Students/Index.Php/Pek/Article/View/12759/4982, 5(1).

Onguko, B., Jepchumba, L., & Gaceri, P. (2013). “For us it was a learning experience.” European Journal of Training and Development, 37(7), 615–634. https://doi.org/10.1108/EJTD-10-2012-0052

Pangastuti, U., & Khafid, M. (2019). Peran Kematangan Karir dalam Memediasi Kompetensi Kejuruan dan Efikasi Diri terhadap Kesiapan Kerja Siswa. Economic Education Analysis Journal, 2(1), 18–23. https://doi.org/10.15294/eeaj.v8i2.31496

Ramadhan, N. G., Hadi, S., & Mariana, R. R. (2021). Implementasi Praktik Kerja Industri Melalui Jalinan Kerjasama Antara Sekolah dengan Industri. 658–669.

Reed_Quigley_2019. (n.d.).

Robbins, D. C. D. and. (1996). Human resource management 5th. John Wiley and Sons,Inc Co., New York . PP, 141–142.

Sugiyarto, S. (2020). The Development of Work Based Learning Kolaboratif (WBL-K) Model to Improve Automotive Maintenance Competence in Community Colleges. Journal of Vocational and Career Education, 5(2), 103–116. https://journal.unnes.ac.id/nju/index.php/jvce/article/view/29291

Tripathi, R., & Chaurasia, K., K. (2014). Analysis And Evaluation Of Training Methods. IRC’s International Journal of Multidisciplinary Research in Social & Management Sciences, 2(2), 2320-8236.

Trisetiyanto, A. N., Syamwil, R., & Widjanarko, D. (2019). The Influence of Young Entrepreneur School ( YES ) Training Model on Knowledge , Attitude and Employee Skills Competence. Journal of Vocational Career Education, 4(2), 133–141.

Tyagi, M. (2021). Expediting the Process of Skill transfer through Training Within Industry- " Job Expediting the Process of Skill transfer through Training Within Industry- “ Job Instruction ” A Case Study. International Journal of Advanced Science and Technology, 29(June 2020), 3179–3188. https://doi.org/10.13140/RG.2.2.12927.53926

Refbacks

  • There are currently no refbacks.


PASCASARJANA UNNES,
Gedung A Kampus Kelud, Semarang 50233
Telp. +62248440516, +62248449017
Faks. +62248449969
Website: http://pps.unnes.ac.id

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
p-ISSN 2339-0344. e-ISSN 2503-2305