Bio Coating Based on Damar Resin on Mild Steel in Corosive Media (Acid Effect) by Using Silica from Rice Husk Extract

Marta Pramudita, Amalia Anugerah Mahallany, Resita Nurambya, Andra Hidayatullah, Alia Badra Pitaloka

Abstract

Bio coating is a natural anti-corrosion material that can be easily degraded and renewed. Rice husk extract and damar resin are alternative natural materials that are believed to have a relatively high silica content, so they can be used as a substitute for synthetic chemicals to protect metals from corrosion. This research was conducted to determine the bio-coating ability of mild steel in H2SO4 corrosive media. The object of the experiment used rice husk waste and damar resin as the primary raw materials. The analytical method used is the weight loss method. The resin sap and silica sol obtained from the ashing of rice husks are mixed to form a homogeneous product. Metal samples coated with bio-coating material are immersed in 0.5 M sulfuric acid solution, with variations in silica concentrations of 500, 1000, 1500 ppm, 1, 2, and 3 hours, and at temperatures of 40, 60, and 80°C, which is then tested for the ability of the bio coating material. The results show that the higher the temperature and the longer the immersion time, the corrosion rate on the metal increases. The variation of the 1500 ppm silica concentration shows better efficiency results than other concentrations at a temperature of 40°C for an immersion time of 1 hour.

Keywords

bio coating; silica; damar; corrosion

Full Text:

PDF

References

Al-Amiery, A. A., Mohamad, A. B., Kadhum, A. A. H., Shaker, L. M., Isahak, W. N. R. W., & Takriff, M. S. (2022). Experimental And Theoretical Study on The Corrosion Inhibition of Mild Steel By Nonanedioic Acid Derivative In Hydrochloric Acid Solution. Scientific Reports, 12(1), 1–21.

Al-Sawaad, H. Z., Kadhim, Z. N., & Mahadi, M. A. (2016). Evaluation of Schiff Base Complex of Copper (Ii) As Corrosion Inhibitor Against0.1 M of Hydrochloric Acid. Journal of Chemical and Pharmaceutical Research, 8(9), 150-163.

Bahari, H. S., Ye, F., Carrillo, E. A. T., Leliopoulos, C., Savaloni, H., & Dutta, J. (2020). Chitosan Nanocomposite Coatings with Enhanced Corrosion Inhibition Effects for Copper. International Journal of Biological Macromolecules, 162, 1566–1577.

Fan, F., Zhou, C., Wang, X., & Szpunar, J. (2015). Layer-By-Layer Assembly of a Self-Healing Anticorrosion Coating on Magnesium Alloys. AcsApplied Materials and Interfaces, 7(49), 27271–27278.

Febriyanti, E., Suhadi, A., & Wahyuady, J. (2017). Pengaruh Waktu Perendaman Dan Penambahan Konsentrasi Nacl (Ppm) Terhadap Laju Korosi Baja Laterit. Sintek Jurnal, 11(2), 79–87.

G Moodley, K. (2019). Advances in Corrosion Inhibition Materials and Technologies: A Review. Advanced Materials Letters, 10(4), 231–247.

Gergely, A. (2018). A Review on Corrosion Protection with Single-Layer, Multilayer, and Composites of Graphene. Corrosion Reviews, 36(2), 155–225.

Gou, J., Sun, M., Ma, X., Tang, G., & Zhang, Y. (2021). Effects of Temperature and Ph Value on the Morphology and Corrosion Resistance of Titanium-Containing Conversion Coating. Applied Surface Science Advances, 3(January), 100060.

Ibrahim, M., Agboola, J. B., Abdulkareem, S. A., Adedipe, O., & Tijani, J. O. (2021). Effects of Elevated Temperature on the Corrosion Resistance of Silver–Cobalt Oxide–Titanium Dioxide (Ag/Co3o4/Tio2) Nanocomposites Coating on Aisi 1020. Scientific Reports, 11(1), 1–14.

Le Saché, E., & Reina, T. R. (2022). Analysis of Dry Reforming As Direct Route for Gas Phase Co2 Conversion. The Past, the Present and Future of Catalytic Drm Technologies. Progress in Energy and Combustion Science, 89, 100970.

Jayakumar, N., Karattu Veedu, K., & Gopalan, N. K. (2019). Durable Hydrophobic Coating Based on Cerium Phosphate Nanorod-Siliconized Epoxy for Corrosion Protection [Research-Article]. AcsApplied Nano Materials, 2(5), 2689–2696.

Le, C. M., & Le, T. H. (2021). The Study’s Chemical Interaction of The Sodium Silicate Solution with Extender Pigments to Investigate High Heat Resistance Silicate Coating. Journal of Analytical Methods in Chemistry, 2021.

Nabipour, H., Wang, X., Song, L., & Hu, Y. (2020). A Fully Bio-Based Coating Made from Alginate, Chitosan And Hydroxyapatite for Protecting Flexible Polyurethane Foam From Fire. Carbohydrate Polymers, 246.

Pal, S., Ji, G., Lgaz, H., Chung, I. M., & Prakash, R. (2020). Lemon Seeds as Green Coating Material for Mitigation of Mild Steel Corrosion in Acid Media: Molecular Dynamics Simulations, Quantum Chemical Calculations and Electrochemical Studies. Journal of Molecular Liquids, 316, 113797.

Parashar, G., Bajpayee, M., & Kamani, P. K. (2003). Water-Borne Non-Toxic High-Performance Inorganic Silicate Coatings. Surface Coatings International Part B: Coatings Transactions, 86(3), 209–216.

Pramudita, M., Novita, L., Ernawati, H., Hidayatullah, A., & Pitaloka, A. B. (2022). Rice Husk Extract and Damar Resin as Corrosion Preventing Bio Coating Materials for Mild Steel in Naoh Solution. World Chemical Engineering Journal, 6(1), 24-28.

Pu, J., Jiang, D., Mo, Y., Wang, L., & Xue, Q. (2021). Corrigendum to “Micro/Nano-Tribological Behaviors of Crown-Type Phosphate Ionic Liquid Ultrathin Films on Self-Assembled Monolayer Modified Silicon” [Surf. Coat. Technol. 205 (2011) 4855–4863] (Surface and Coatings Technolog (2011) 205(20) (4855–4863), (S. Surface and Coatings Technology, 428(November), 127891.

Septiari, R., & Supomo, H. (2013). Studi Penggunaan Ekstrak Bahan Alami Sebagai Inhibitor Korosi Pada Cat Utuk Pelat Kapal A36. Jurnal Teknik Pomits, 2(1), 1–5.

Songok, J., Bousfield, D., Ridgway, C., Gane, P., & Toivakka, M. (2012). Drying of Porous Coating: Influence of Coating Composition. Industrial and Engineering Chemistry Research, 51(42), 13680–13685.

Syed, J. A., Tang, S., & Meng, X. (2017). Super-Hydrophobic Multilayer Coatings with Layer Number Tuned Swapping in Surface Wettability and Redox Catalytic Anti-Corrosion Application. Scientific Reports, 7(1).

Umoren, S. A., Abdullahi, M. T., & Solomon, M. M. (2022). An Overview on the Use of Corrosion Inhibitors for the Corrosion Control of Mg and Its Alloys in Diverse Media. Journal of Materials Research and Technology, 20, 2060–2093.

Williams, G., Kousis, C., Mcmurray, N., & Keil, P. (2019). A Mechanistic Investigation of Corrosion-Driven Organic Coating Failure on Magnesium and Its Alloys. Npj Materials Degradation, 3(1), 1-8.

Refbacks

  • There are currently no refbacks.