The Effect of Aggregate Size and Resin Fraction on The Damping Capacity of Epoxy-Marble Composite
Abstract
The production of material with high precission and high complexity has been rapidly increasing in several industrial sector. The high accuracy is difficult to achieve during manufacturing due to vibration factors that influenced the final product of material. In this study the relationship between particle size and percentage of marble aggregate with epoxy resin on damping capacity was studied systematically. The Composite materials were fabricated by using conventional casting technique with 10, 25, and 50% volume fraction of resin and two marble aggregate groups with 0.5-0.7 mm and 1.4-2.0 mm in particle size. The casting process was using multilayer pouring technologies to prevent void formation. 10% epoxy resin-fine marble aggregate has very good vibration result with 0.003 mm in displacement, 0.23 mm/s in velocity, and 0.2 m/s2 in acceleration. The 10% epoxy resin-fine marble aggregate also has the best damping ratio among the composite due to the large specific area and porosity inside the marble material with value of 0.5%. The multilayer pour techniques for composite has been successfully adapted in this study to minimalize void/bubble formation inside and upperside of epoxy resin during the fabrication of composite. The secondary electron image of composite was observed that the marble aggregates and epoxy resin bonding are very good and no crack or void formation in the interface of the marble aggregate and epoxy resin.
Keywords
Full Text:
PDFReferences
Corinaldesi, V., Moriconi, G., Naik, T. R. 2010. Characterization of marble powder for its use in mortar and concrete. Construction and building materials. 24(1): 113-117.
Golestaneh, M., Amini, G., Najafpour, G., Beygi, M. 2010. Evaluation of mechanical strength of epoxy polymer concrete with silica powder as filler. World Applied Sciences Journal. 9(2): 216-220.
Haddad, H., Al Kobaisi, M. 2012. Optimization of the polymer concrete used for manufacturing bases for precision tool machines. Composites Part B: Engineering. 43(8): 3061-3068.
Li, M., Liu, H., Gu, Y., Li, Y., Zhang, Z. 2014. Effects of carbon fiber surface characteristics on interfacial bonding of epoxy resin composite subjected to hygrothermal treatments. Applied surface science. 288: 666-672.
Lian, C., Zhuge, Y., Beecham, S. 2011. The relationship between porosity and strength for porous concrete. Construction and building materials. 25(11): 4294-4298.
Nambiar, E. K., Ramamurthy, K. 2008. Models for strength prediction of foam concrete. Materials and structures. 41(2): 247-254.
Nayak, S. K., Satapathy, A. 2020. Development and characterization of polymer-based composites filled with micro-sized waste marble dust. Polymers and Polymer Composites. 0967391120926066.
Panteliou, S., Zonios, K., Chondrou, I., Fernandes, H., Agathopoulos, S., Ferreira, J. 2009. Damping associated with porosity in alumina. International Journal of Mechanics and Materials in Design. 5(2): 167-174.
Piratelli-Filho, A., Levy-Neto, F. 2010. Behavior of granite-epoxy composite beams subjected to mechanical vibrations. Materials research. 13(4): 497-503.
Rajurkar, K. P., Sundaram, M., Malshe, A. 2013. Review of electrochemical and electrodischarge machining. Procedia Cirp. 6: 13-26.
Ramana, M. V., Thyla, P., Mahendrakumar, N., Praveena, K. 2021. Selection of resin and aggregates for particulate polymer concrete machine tool structures-A review. Materials Today: Proceedings.
Reis, J., Ferreira, A. 2006. The effects of atmospheric exposure on the fracture properties of polymer concrete. Building and Environment. 41(3): 262-267.
Ribeiro, M. C. S., Tavares, C. M. L., Figueiredo, M., Ferreira, A. J. M., Fernandes, A. A. 2003. Bending characteristics of resin concretes. Materials research. 6(2): 247-254.
Saribiyik, M., Piskin, A., Saribiyik, A. 2013. The effects of waste glass powder usage on polymer concrete properties. Construction and building materials. 47: 840-844.
Singh, M., Srivastava, A., Bhunia, D. 2017. An investigation on effect of partial replacement of cement by waste marble slurry. Construction and building materials. 134: 471-488.
Singh, S., Nagar, R., Agrawal, V. 2016. Feasibility as a potential substitute for natural sand: a comparative study between granite cutting waste and marble slurry. Procedia Environmental Sciences. 35: 571-582.
Wang, T., Zhang, J., Zhang, Y. 2014. Forming process and damping properties of carbon fiber-reinforced polymer concrete. Journal of Reinforced Plastics and Composites. 33(1): 93-100.
Yin, J., Zhang, J., Wang, T., Wang, W., Ren, X. 2015. Mechanical properties optimization of resin mineral composite for machine tool bed. Journal of Reinforced Plastics and Composites. 34(4): 329-340.
Yin, J., Zhang, J., Wang, T., Zhang, Y., Wang, W. 2018. Experimental investigation on air void and compressive strength optimization of resin mineral composite for precision machine tool. Polymer Composites. 39(2): 457-466.
Yin, J., Zhang, J., Zhang, Y., Wang, W. 2017. Porosity, mechanical properties, and damping ratio of particulate‐filled polymer composite for precision machine tools. Journal of Applied Polymer Science. 134(6).
Zhang, S., To, S., Wang, S., Zhu, Z. 2015. A review of surface roughness generation in ultra-precision machining. International journal of machine tools and manufacture. 91. 76-95.
Zhang, S., To, S., Zhang, G., Zhu, Z. 2015. A review of machine-tool vibration and its influence upon surface generation in ultra-precision machining. International journal of machine tools and manufacture. 91: 34-42.
Refbacks
- There are currently no refbacks.
