THE PERFORMANCE OF EXTRACTION EQUIPMENT MODIFICATION TOWARD SIZE
PARTICLE OF TUBER AND YIELD OF INULIN OF DAHLIA FLOWER TUBER

Elmi Sundari, Erti Praputri, Wenny Marthiana

Abstract

Isolation of inulin from starch generally is done by extraction method. The size of the material to be extracted will affect the extraction process performance. In laboratory scale, the size reduction was done with a knife and the separation of starch from tubers was done by juicer. Temperature fluctuations during the extraction process would affect the yield of inulin, hence juicers and waterbath were found ineffective for larger scale. This research was aimed to design an extractor equipped with agitator blades for size reduction and a temperature controller. Extractor performance was investigated by evaluating agitation time (60-150 minutes), distance between agitator blades on the shaft (5 and 7 cm), number of the agitators, (1, 2, and 3 blades) against the fineness of cut material, starch and inulin content.  The results showed that the highest fineness of the samples was achieved at a distance of agitator blade of 7 cm, with 3 agitator blades and agitating time of 150 minutes. The highest yield of starch was 11.7% at size reduction time of 120 and 150 minutes using 3-blades agitator and the distance of 7 cm. The content of crude inulin obtained were by using the extractor was 2.206% and 2.213% by using the water bath. The difference of inulin content was 0.007% so it suggests that the extractor designed in this study can be used on inulin production in larger scale. The efficiency of the extractor was 85%.

Keywords

extractor; inulin; starch; size reduction

Full Text:

PDF

References

At Tachriirotul, M. 2011. Inulin: Nutrisi Bakteri Baik dan Musuh Bakteri Patogen, http://attadotcom.wordpress.com, accessed on 27/04/2011.

Budiwati, A.T. 2010. Pengembangan Proses Pembuatan Inulin Dari Umbi Tanaman Dahlia. Laporan Penelitian Program Insentif Riset Peneliti Dan Rekayasa Lembaga Ilmu Pengetahuan Indonesia.

Dewi, K.H. Silsia, D. Susanti, L. Markom, M., Yanti, N.V. 2010. Pengaruh Kecepatan Sentrifugasi Pada Proses Pemisahan Hasil Ekstraksi Teripang (Holothuria Scabra) Sebagai Sumber Testosteron pada Berbagai Kecepatan dan Lama Pengadukan. Prosiding Seminar Nasional Teknik Kimia Kejuangan. Yogyakarta.

Djafar, F., Supardan, M.D., Gani, S. 2010. Pengaruh Ukuran Partikel, SF Rasio dan Waktu Proses Terhadap Rendeman Pada Hidrodistilasi Minyak Jahe. Balai Riset dan Standardisasi Industri Banda Aceh.

Driss, Z. Karray, S. Chtourou, W. Kchaou, H. Abid, M.S. 2012. A Study of Mixing Structure in Stirred Tanks Equippped with Multiple Four-Blade Rushton Impellers. The Archive of Mechanical Engineering. 59(1):53-72.

Greg, Kelly, N. D. 2008. Inuin–Type Prebiotic-A Review. Alternative Medicine Reviewer. 13(4):315-329.

Gaafar, A.M. 2010. Extraction Conditions of Inulin from Jerusalem Artichoke Tubers and It’s Effect on Blood Glucose and Lipid Profile in Diabetic Rats. Journal of American Science. 6(5):36-43.

Kosasih, W. Pudjiraharti, S. Ratnaningrum Priatni S. 2015. Preparation of Inulin, from Dahlia Tuber. Procedia Chemistry. 16:190-194.

Melani, H. Susilowati, A. Iskandar Y. M. Lotulung, P.D., Andayani, D. G. S. 2015. Characteri-zation of Inulin from Local Red Dahlia (Dahlia sp.L) Tuber by Infrared Spectroscopy. Procedia Chemistry. 16:78-64.

Maaruf, Y., Azhar, M., Oktavia, B. 2011. Penentuan Kadar RBB Pada Dye-inulin Secara HPLC Melalui Pembentukan Senyawa dye-inulin. Final Report. FMIPA UNP.

Mc. Cabe, W.L.Smith, J.C., Harrit P. 1985. Unit Operation of Chemical Engineering 4th Ed. Mc. Hill New York.

Megawati, Machsunah E.L. 2016. Ekstraksi Pektin dari Kulit Pisang Kepok (Musa paradisiaca) Menggunakan Pelarut HCl sebagai Edible Film. Jurnal Bahan Alam Terbarukan. 5 (1): 14-21.

Nevi. 2013. Sumbar Berpeluang Kembangkan Bunga Dahlia Bernilai Ekonomis. Berita Terkini Sumatera Barat.

Retnaningtyas, Y. Kristiningrum, N. 2015. Determination of Inulin Content in Dahlia variabilis and Dahlia pinnata Tuber Extract by TLC Densitometry Method. e-Jurnal Pustaka Kesehatan. 3(2):284-288.

Sari, E. 2010. Optimasi Kinerja Alat Ekstraksi Dalam Perolehan Oleoresin kulit Kayu Mania Pada Skala Pilot Plant. Jurnal Ilmiah Ekotrans. 10(1).

Shastri, A.P, Borkar, N.B. 2015. A Review on Nomenclature of Agitator. International Journal of Research in Advent Technology. Special Issue on Special Issue 1st International Conference on Advent Trends in Engineering, Science and Technology. 435-439.

Sundari, E. Desfitri, E.R. Martynis, M. Praputri, E., 2014. Identifikasi dan Kondisi Ekstraksi Inulin dari Umbi Dahlia di Sumatera Barat. Prosiding SNSTL Volume I, September. Teknik Lingkungan UNAND.

Thangaraj, K. Joshi, J. B. 2006. Effect of Impeller Design on Flow Pattern and Mixing in Stirred Tanks. Chemical Engineering Journal. 115(3):173-193.

Wallas, S.M. 1990. Chemical Process Equipment, Selection and Design. Department of Chemical and Petroleum Engineering. University of Kansas.

Wang, J. 2010. Suspension of High Concentration Slurry in Agitated Vessels, School of Civil, Environmental and Chemical Engineering. RMIT University, Melbourne.

Yurmizar, 1989, Penandaan Inulin dengan Radionuklida Teknesium-99m dan Biodistribusinya pada Tikus Putih, Skripsi FMIPA, Padang: Universitas Andalas.

Zubaidah, E. dan Akhadiana W. 2013. Comperative Study of Inulin Extracts from Dahlia, Yam, and Gembili Tubers as Prebiotic. Food and Nutrition Sciences. 4:8-12

Refbacks

  • There are currently no refbacks.