Analysis of the Advantages and Disadvantages of Using Autodesk Revit for the Dean Building of the Faculty of Education, Universitas Negeri Semarang
(1) Semarang State University
(2) Semarang State University
Abstract
Abstract. Building Information Modeling (BIM) as a supporting software of the fourth phase of the industrial revolution in Indonesia in the construction sector is a digital technology mode to increase the efficiency and accuracy of construction work to avoid mistakes during the planning to the implementation period. This study uses the Autodesk Revit application to provide the output of working drawings, 3D modeling, and calculate the volume and cost of work carried out in the Dean building of the Faculty of Education, Universitas Negeri Semarang. The purpose of this study is to determine the advantages and disadvantages of using Autodesk Revit for planning the Dean building of the Faculty of Education, Universitas Negeri Semarang. The results of this study are the advantages of using Autodesk Revit for building modeling, including providing convenience with design integration in one application, and avoiding crashes between designs. Autodesk Revit also has weaknesses, such as the need for high hardware specifications on the device, high license prices, the application it is necessary to create a new material family according to the design and size required, Autodesk Revit cannot calculate the preparatory work because the calculation of the volume and cost of Autodesk Revit work is limited to data input.
Keywords
Full Text:
PDFReferences
I. A. Zotkin, S. P., Ignatova, E. V., & Zotkina, “The organization of autodesk revit software interaction with applications for structural analysis,” Procedia Eng., no. 153, pp. 915–919, 2016.
A. I. Mamedmuradov, Y. D., & Kovalev, “HVAC design in Autodesk Revit using Dynamo,” AlfaBuild, vol. 14, pp. 1402–1402, 2020.
A. S. Telaga, “A review of BIM (Building Information Modeling) implementation in Indonesia construction industry. In IOP Conference Series: Materials Science and Engineering,” IOP Publ., vol. Vol. 352, 2018.
S. Pinti, L., Codinhoto, R., Bonelli, “A Review of Building Information Modelling (BIM) for Facility Management (FM): Implementation in Public Organisations,” ISPRS Int. J. Geo-Information, vol. Vol. 12, n, p. 1540, 2022.
Menteri Pekerjaan Umum Dan Perumahan Rakyat, “Peraturan Menteri Pekerjaan Umum Dan Perumahan Rakyat Nomor 22/PRT/M/2018 Tentang Pedoman Teknis Pembangunan Bangunan Gedung Negara,” 2018.
Peraturan Pemerintah, “Peraturan Pemerintah Nomor 16 Tahun 2021 Tentang Standar Pelaksanaan dan Pengawasan Gedung,” 2021.
R. Y. R. Toreh, “Studi Upaya Pengembangan Kompetensi Sumber Daya Manusia Untuk Implementasi Building Information modelling (BIM) Di Singapura,” Kementeri. Pekerj. Umum dan Perumah. Rakyat, 2018.
F. Banfi, “The integration of a scan-To-hbim process in bim application: The development of an add-in to guide users in autodesk revit,” Int. Conf. Geomatics Restor., vol. XLII-2/W11, pp. 141–148, 2019.
S. Reddy, E. R., & Kailashkumar, “Design and Modelling of G+ 5 Commercial Building by Autodesk Revit ArchitectureE,” Int. J. Eng. Adv. Technol., vol. 9(2), pp. 4732–4736, 2019.
M. . Latiffi A.A., Brahim J., Fathi, “Roles and Responsibilities of Construction Players in Projects Using Building Information Modeling (BIM),” Springer Int. Publ. Switz., pp. 173–182, 2016.
Y. Marizan, “Penggunaan Software Autodesk Revit Studi Kasus Perencanaan Puskesmas Sukajadi Kota Prabumulih,” J. Ilm. Bering’s, 2019.
V. Setiawan, E. B., & Abma, “Penerapan Konsep BIM Dari Studi Kasus Dan Perspektif Pengguna,” Civ. Eng. Environ. Disaster Risk Manag. Symp. Proceeding 2021, 2021.
D. Ferial, R., Hidayat, B., Pesela, R. C., & Daoed, “Quantity take-off berbasis building information modeling (bim) studi kasus: gedung bappeda padang,” J. Rekayasa Sipil, vol. 17(3), pp. 228–238, 2021.
Refbacks
- There are currently no refbacks.
