Developing Student Entrepreneurship Through Teaching Factory Program in the Field of Motorcycle Service
(1) SMK Negeri 2 Kendal, Indonesia
(2) Pascasarjana, Universitas Negeri Semarang, Indonesia
(3) Pascasarjana, Universitas Negeri Semarang, Indonesia
Abstract
Teaching Factory program in the field of motorcycle service which is developed in SMK Bina Utama Kendal is quite well. However, it does not train students to gain practical experience in applying entrepreneurship. Students have not been involved in the planning, organizing, monitoring, and evaluating stages in the teaching factory program. This research aims to develop the management model of teaching factory programs that increasing student entrepreneurship in the field of motorcycle engineering and business competence. This research use R&D methodology. The research procedure consists of (1) Introduction, (2) Developing Model, (3) Testing Model. The result of the study shows the management's last model in teaching factory program is valid, effective, and easy to use. It can be used to develop student entrepreneurship based on significant results between pretest and post-test. The model which is developed in this research use entrepreneur real concept by asking students directly and giving responsibility to start from planning, organizing, conducting, evaluating in teaching factory management. This model develops students entrepreneurship such as discipline, hard work, creativity, a sense of collaboration, honest, and goal-oriented. Furthermore, it increases student's knowledge and ability in the field of motorcycle engineering.
Keywords
Full Text:
PDFReferences
Afonso, P. (2018). Collaborative Machine Tool design : the Teaching Factory paradigm Collaborative Machine Tool design : Conference the Teaching Factory paradigm Costing models for capacity optimization in Industry Tra. Procedia Manufacturing,23(2017),123–128.
Arikunto, S. 2013. Prosedur Penelitian suatu Pendekatan Praktik. Yogyakarta: Rineka Cipta.
Arikunto, S. 2018. Dasar-Dasar Evaluasi Pendidikan Edisi 2 . Jakarta: Bumi Aksara.
BPS. 2019. Agustus 2019: Tingkat Pengangguran Terbuka (TPT) sebesar 5,28 persen. https://www.bps.go.id/pressrelease/2019/11/05/1565/agustus-2019--tingkat-pengangguran-terbuka--tpt--sebesar-5-28-persen.html (diunduh 16 Desember 2019)
Chryssolouris, G., Mavrikios, D., & Rentzos, L. (2016). The Teaching Factory: A Manufacturing Education Paradigm. Procedia CIRP, 57, 44–48. https://doi.org/10.1016/j.procir.2016.11.009
Direktorat Pembinaan SMK. 2016. Grand Design Pengembangan Teaching Factory dan technopark di SMK. Jakarta: Direktorat Jenderal Pendidikan Dasar dan Menengah.
Direktorat Pembinaan SMK. 2017. Tata Kelola Pelaksanaan Teaching Factory. Jakarta: Direktorat Pembinaan SMK.
Isnaini, A.. 2012. Berani Berwirausaha!. Surabaya: Insan Cendekia
Jailani., Rusdarti., & Sudarma, K. 2017. “Pengaruh Kewirausahaan, Motivasi Belajar, Sosial Ekonomi Orang Tua dan self Efficacy Terhadap Minat Berwirausaha Siswaâ€. Journal of Economic Education 6 (1) (2017) 52-59.
Kuat. (2017). Penumbuhkan jiwa kewirausahaan melalui implementasi edupreneurship di Sekolah Menengah Kejuruan.Seminar nasional pendidikan 2017 (snp 2017), issn: 2503-4855. 2017(Snp), 40–46.
Kurniawan, R. (2017). Pengaruh Penerapan Model Pembelajaran Teaching Factory 6 Langkah (Tf-6M) Dan Prestasi Belajar Kewirausahaan Terhadap Minat Wirausaha. Innovation of Vocational Technology Education, 10 (1), 57–66. https://doi.org/10.17509/invotec.v10i1.5092
Kuswantoro, A. 2014. Teaching Factory Rencana dan Nilai Entrepreneursip. Yogyakarta: Graha Ilmu.
Moleong, L. 2008. Metodologi Penelitian Kualitatif. Bandung: Remaja Rosda Karya.
Müller-Frommeyer, L. C., Aymans, S. C., Bargmann, C., Kauffeld, S., & Herrmann, C. (2017). Introducing Competency Models as a Tool for Holistic Competency Development in Learning Factories: Challenges, Example and Future Application. Procedia Manufacturing, 9, 307–314. https://doi.org/10.1016/j.promfg.2017.04.015
Nurtanto, M., Ramdani, S. D., & Nurhaji, S. (2017). Pengembangan Model Teaching Factory Di Sekolah Kejuruan. Prosiding Seminar Nasional Pendidikan, 467–483.
Purwidyantini, S. H., Prajanti, S. D. W., & Widiyanto. (2017). Factory Students of Vocational High School Negeri 2 Kendal. Journal of Economic Education, 6(2), 161–168.
Rentzos, L., Doukas, M., Mavrikios, D., Mourtzis, D., & Chryssolouris, G. (2014). Integrating manufacturing education with industrial practice using teaching factory paradigm: A construction equipment application. Procedia CIRP, 17, 189–194. https://doi.org/10.1016/j.procir.2014.01.126
Saroni, M. 2012. Mendidik & Melatih Entrepreneurship Muda. Yogyakarta: Ar-Ruzz Media
Setyawan, D., Hidayat, D., & Suherman, A. (2016). Meningkatkan Sikap Enterpreneurship Siswa Melalui Penerapan Model Pembelajaran Teaching Factory 6 Langkah. Journal of Mechanical Engineering Education, 1(1), 35. https://doi.org/10.17509/jmee.v1i1.3734
Siswanto, I. 2015 “ Teaching Factory Program Keahlian Teknik Otomotifâ€. Prosiding Seminar Nasional Pendidikan Teknik Otomotif UMP. 23 Mei 2015
Sukestiyarno. 2014. Statistika Dasar. Yogyakarta: Andi.
Sukmadinata. 2015. Metode Penelitian Pendidikan. Bandung: Remaja Rosda Karya.
Sugiyono. 2016. Metode Penelitian Kuantitatif, Kualitatif, Dan R & D. Bandung: Alfabeta.
Sugiyono. 2017. Metode Penelitian & Pengembangan Untuk Bidang : Pendidikan, Manajemen, Sosial, Teknik. Bandung: Alfabeta.
Supranata. 2004. Analisis, Validitas, Reliabilitas dan Interpretasi Hasil Tes . Bandung: Rosda.
Widoyoko. 2017. Evaluasi Proses Pembelajaran. Yogyakarta: Pustaka Pelajar
Wijaya, M. B. R., Tri, A., Rachman, M., & Mantja, W. (2014). The Journal of Educational Development “ PROCOM CAKEP †In The Field Of Engineering Technology, 2(1), 53–61.
Refbacks
- There are currently no refbacks.
PASCASARJANA UNNES, |  This work is licensed under a Creative Commons Attribution 4.0 International License. p-ISSN 2339-0344. e-ISSN 2503-2305 |