Real-Time Web-Based Monitoring System for Temperature, Humidity, and Solar Panels in Ramie Drying Facilities
(1) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
(2) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
(3) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
(4) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
(5) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
(6) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
(7) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
(8) Department of Electrical Engineering, Politeknik Negeri Semarang, Indonesia
Abstract
Purpose: To address the manual monitoring challenges in processing ramie fibers, especially during drying. The purpose is to create a monitoring system that oversees room temperature, humidity, and the status of solar panels, crucial factors in ramie productivity.
Methods: Real-time web-based system development that monitors room temperature, humidity, and the performance of solar panels in a ramie drying room using the Internet of Things architecture ESP32 with communication through GSM SIM 800L in rural areas.
Results: The system can display real-time information such as temperature data, humidity, and electrical energy parameters derived from the solar panel's utilization in the ramie drying room. By doing so, users gain efficiency and effectiveness in obtaining information, significantly enhancing ramie fiber productivity.
Novelty: Integration of sensor instruments, low-power ESP32 microcontrollers, GSM Telecommunication, Solar Cell Energy as a power source, and a real-time web-based Monitoring Information System implemented in a ramie drying dome. This simplifies the monitoring process and optimizes limited resources such as space, energy, telecommunications, and human resources, which are typically constrained infrastructure in the ramie fiber agricultural system.
Keywords
Full Text:
PDFReferences
S. Febriyanti and S. Solehatin, “Application design for web-based car services to increase work time estimates,” J. Student Res. Explor., vol. 2, no. 1, pp. 11–21, Jan. 2024, doi: 10.52465/josre.v2i1.231.
F. Umar, M. R. A. Septian, and D. A. A. Pertiwi, “Effect of Digitalization on Business Performance in the MSME Industry Context,” J. Inf. Syst. Explor. Res., vol. 2, no. 1, Dec. 2023, doi: 10.52465/joiser.v2i1.199.
M. M. U. Saleheen, M. S. Islam, R. Fahad, M. J. B. Belal, and R. Khan, “IoT-Based Smart Agriculture Monitoring System,” in 2022 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET), 2022, pp. 1–6. doi: 10.1109/IICAIET55139.2022.9936826.
F. K. Shaikh, S. Karim, S. Zeadally, and J. Nebhen, “Recent Trends in Internet-of-Things-Enabled Sensor Technologies for Smart Agriculture,” IEEE Internet Things J., vol. 9, no. 23, pp. 23583–23598, 2022, doi: 10.1109/JIOT.2022.3210154.
A. Srivastava, S. K. Maurya, and P. Kumar Saini, “Blockchain based Authentication for Internet of Things Devices based on Smart Farming,” in 2023 8th International Conference on Communication and Electronics Systems (ICCES), 2023, pp. 577–582. doi: 10.1109/ICCES57224.2023.10192605.
I. A. Wicaksono, I. Windani, and E. Erny, “Prioritas Strategi Pengembangan Serat Rami (Boehmeria nivea proper) Jenis Ina Grass di Kabupaten Wonosobo,” Agrol. J. Ilmu-ilmu Pertan., vol. 28, no. 2 SE-Articles, Sep. 2021, doi: 10.22487/agrolandnasional.v28i2.806.
Z.-T. Liu et al., “Study on the performance of ramie fiber modified with ethylenediamine,” Carbohydr. Polym., vol. 71, no. 1, pp. 18–25, 2008, doi: https://doi.org/10.1016/j.carbpol.2007.05.008.
N. H. Syifa, A. Yulianto, and U. Nurbaiti, “Pembuatan dan Karakterisasi Sifat Fisis Komposit Multilayer Serat Rami,” J. Pendidik. Fis. dan Teknol., vol. 7, no. 2, pp. 87–95, 2021, doi: 10.29303/jpft.v7i2.2783.
S. S. Hidayat, A. Suharjono, T. Prasetyo, Jumi, A. Roihatin, and A. S. Alfauzi, “Development of Two-In-One Type Drying Machine and Grinder Control System Based On Wireless Sensors Network,” in 2018 International Conference on Applied Science and Technology (iCAST), 2018, pp. 750–753. doi: 10.1109/iCAST1.2018.8751611.
I. Maulana, “Pengaruh Lama Perendaman Larutan KOH Terhadap Kekuatan Tarik dan Kekuatan Bending Komposit Hibrid Serat Rami dan Bambu,” J. Tek. Mesin, vol. 09, no. 03, pp. 99–104, 2021.
F.-J. Ferrández-Pastor, J. Mora-Pascual, and D. Díaz-Lajara, “Agricultural traceability model based on IoT and Blockchain: Application in industrial hemp production,” J. Ind. Inf. Integr., vol. 29, p. 100381, 2022, doi: https://doi.org/10.1016/j.jii.2022.100381.
P. William, G. Ramu, L. R. Gupta, P. Sing, A. Shrivastava, and A. P. Srivastava, “Hybrid Temperature and Humidity Monitoring System using IoT for Smart Garden,” in 2023 Second International Conference on Augmented Intelligence and Sustainable Systems (ICAISS), 2023, pp. 1514–1518. doi: 10.1109/ICAISS58487.2023.10250538.
A. Vishwakarma, A. Sahu, N. Sheikh, P. Payasi, S. K. Rajput, and L. Srivastava, “IOT Based Greenhouse Monitoring And Controlling System,” in 2020 IEEE Students Conference on Engineering & Systems (SCES), 2020, pp. 1–6. doi: 10.1109/SCES50439.2020.9236693.
D. Zhang, X. Zhou, Y. Gao, and L. Lyu, “Structural Characteristics and Sound Absorption Properties of Waste Hemp Fiber,” Coatings, vol. 12, no. 12, 2022, doi: 10.3390/coatings12121907.
H. Mukhtar, D. Perdana, P. Sukarno, and A. Mulyana, “Sistem Pemantauan Kapasitas Sampah Berbasis IoT (SiKaSiT) untuk Pencegahan Banjir di Wilayah Sungai Citarum Bojongsoang Kabupaten Bandung,” J. Teknol. Lingkung., vol. 21, no. 1, pp. 56–67, 2020, doi: 10.29122/jtl.v21i1.3622.
D. Shah and V. haradi, “IoT Based Biometrics Implementation on Raspberry Pi,” Procedia Comput. Sci., vol. 79, pp. 328–336, 2016, doi: https://doi.org/10.1016/j.procs.2016.03.043.
“Electrical Energy Monitoring System and Automatic Transfer Switch (ATS) Controller with the Internet of Things for Solar Power Plants,” J. Soft Comput. Explor., vol. 1, no. 1, Sep. 2020, doi: 10.52465/joscex.v1i1.2.
A. H. Ngu, M. Gutierrez, V. Metsis, S. Nepal, and Q. Z. Sheng, “IoT Middleware: A Survey on Issues and Enabling Technologies,” IEEE Internet Things J., vol. 4, no. 1, pp. 1–20, 2017, doi: 10.1109/JIOT.2016.2615180.
I. Mujahidin and A. Kitagawa, “Ring slot CP antenna for the hybrid electromagnetic solar energy harvesting and IoT application,” Telkomnika (Telecommunication Comput. Electron. Control., vol. 21, no. 2, pp. 290–301, 2023, doi: 10.12928/TELKOMNIKA.v21i2.24739.
Z. Wan, Y. Song, and Z. Cao, “Environment Dynamic Monitoring and Remote Control of Greenhouse with ESP8266 NodeMCU,” in 2019 IEEE 3rd Information Technology, Networking, Electronic and Automation Control Conference (ITNEC), 2019, pp. 377–382. doi: 10.1109/ITNEC.2019.8729519.
P. Deshmukh et al., “Development of Low-Cost Temperature and Relative Humidity Remote Monitoring System,” in 2023 IEEE Region 10 Symposium (TENSYMP), 2023, pp. 1–5. doi: 10.1109/TENSYMP55890.2023.10223611.
P. S. B. Macheso, T. D. Manda, A. G. Meela, J. S. Mlatho, G. T. Taulo, and B. M’mame, “Environmental Parameter Monitoring System Based on NodeMCU ESP8266, MQTT and Node-RED,” in 2022 International Conference on Computer Communication and Informatics (ICCCI), 2022, pp. 1–4. doi: 10.1109/ICCCI54379.2022.9740787.
M. C. A. Prabowo, A. A. Janitra, and N. M. Wibowo, “Sistem Monitoring Hidroponik Berbasis IoT dengan Sensor Suhu, pH, dan Ketinggian Air Menggunakan ESP8266,” J. TECNOSCIENZA, vol. 7, no. 2, pp. 312–323, 2023.
G. Verma, P. Mittal, and S. Farheen, “Real Time Weather Prediction System Using IOT and Machine Learning,” in 2020 6th International Conference on Signal Processing and Communication (ICSC), 2020, pp. 322–324. doi: 10.1109/ICSC48311.2020.9182766.
S. Norma Mustika, Muladi, A. Nur Handayani, M. Afnan Habibi, Z. Farhan Makarim, and E. Noerhayati, “Smart Garden Monstera Adansonii Based On IoT Using DHT11,” in 2022 3rd International Conference on Electrical Engineering and Informatics (ICon EEI), 2022, pp. 153–156. doi: 10.1109/IConEEI55709.2022.9972276.
O. L. A. López, H. Alves, R. D. Souza, S. Montejo-Sánchez, E. M. G. Fernández, and M. Latva-Aho, “Massive Wireless Energy Transfer: Enabling Sustainable IoT Toward 6G Era,” IEEE Internet Things J., vol. 8, no. 11, pp. 8816–8835, 2021, doi: 10.1109/JIOT.2021.3050612.
S. S. Hidayat, D. Rahmawati, M. C. Ardi Prabowo, L. Triyono, and F. T. Putri, “Determining the Rice Seeds Quality Using Convolutional Neural Network,” Int. J. Informatics Vis., vol. 7, no. 2, pp. 527–534, 2023, doi: 10.30630/joiv.7.2.1175.
S. B. Merrah and A. Adane, “Meteorological sensor network based on ESP8266,” in 2023 International Conference on Advances in Electronics, Control and Communication Systems (ICAECCS), 2023, pp. 1–6. doi: 10.1109/ICAECCS56710.2023.10105060.
Z. Huang, Y. Peng, J. Li, F. Tong, K. Zhu, and L. Peng, “Secrecy Enhancing of SSK Systems for IoT Applications in Smart Cities,” IEEE Internet Things J., vol. 8, no. 8, pp. 6385–6392, 2021, doi: 10.1109/JIOT.2021.3050331.
M. Sheth and P. Rupani, “Smart Gardening Automation using IoT With BLYNK App,” in 2019 3rd International Conference on Trends in Electronics and Informatics (ICOEI), 2019, pp. 266–270. doi: 10.1109/ICOEI.2019.8862591.
I. Hafeez, M. Antikainen, A. Y. Ding, and S. Tarkoma, “IoT-KEEPER: Detecting Malicious IoT Network Activity Using Online Traffic Analysis at the Edge,” IEEE Trans. Netw. Serv. Manag., vol. 17, no. 1, pp. 45–59, 2020, doi: 10.1109/TNSM.2020.2966951.
P. T. Indonesia and P. Semarang, “WEBSITE MONITORING UNTUK SISTEM DETEKSI DINI TANAH LONGSOR BERBASIS LOW POWER WIDE AREA NETWORK,” Pros. Semin. Nas. NCIET, vol. 1, no. September, pp. 312–316, 2020.
R. Xiong, J. Wang, N. Zhang, and Y. Ma, “Deep hybrid collaborative filtering for Web service recommendation,” Expert Syst. Appl., vol. 110, pp. 191–205, 2018, doi: https://doi.org/10.1016/j.eswa.2018.05.039.
I. Mujahidin and A. Kitagawa, “CP Antenna with 2 × 4 Hybrid Coupler for Wireless Sensing and Hybrid RF Solar Energy Harvesting.,” Sensors (Basel)., vol. 21, no. 22, Nov. 2021, doi: 10.3390/s21227721.
B. M. P M and R. Prakash, “A Smart Medi-Care Refrigerator using IOT,” vol. 8, pp. 73–75, Nov. 2020, doi: 10.22214/ijraset.2020.32055.
M. H. M. Kouhani, J. Wu, A. Tavakoli, A. J. Weber, and W. Li, “Wireless, passive strain sensor in a doughnut-shaped contact lens for continuous non-invasive self-monitoring of intraocular pressure,” Lab Chip, vol. 20, no. 2, pp. 332–342, 2020, doi: 10.1039/C9LC00735K.
I. Mujahidin and A. Kitagawa, “The Compact 2.4 GHz Hybrid Electromagnetic Solar Energy Harvesting (HES-EH) circuit using Seven Stage Voltage Doubler and Organic Thin Film Solar Cell,” in 2021 4th International Seminar on Research of Information Technology and Intelligent Systems (ISRITI), IEEE, Dec. 2021, pp. 640–645. doi: 10.1109/ISRITI54043.2021.9702844.
S. Afzal, L. C. C. De Biase, G. Fedrecheski, W. T. Pereira, and M. K. Zuffo, “Analysis of Web-Based IoT through Heterogeneous Networks: Swarm Computing over LoRaWAN,” Sensors, vol. 22, no. 2, p. 664, Jan. 2022, doi: 10.3390/s22020664.
I. Mujahidin and A. Kitagawa, “The Novel CPW 2.4 GHz Antenna with Parallel Hybrid Electromagnetic Solar for IoT Energy Harvesting and Wireless Sensors,” Int. J. Adv. Comput. Sci. Appl., vol. 12, no. 8, pp. 393–400, 2021, doi: 10.14569/IJACSA.2021.0120845.
T. I. Fajri, . M., and . R., “Design of a Hydroponic Smart Farm System with Web-Based IoT in Bireuen Regency,” Int. J. Res. Rev., vol. 9, no. 9, pp. 391–397, 2022, doi: 10.52403/ijrr.20220945.
Refbacks
- There are currently no refbacks.
Scientific Journal of Informatics (SJI)
p-ISSN 2407-7658 | e-ISSN 2460-0040
Published By Department of Computer Science Universitas Negeri Semarang
Website: https://journal.unnes.ac.id/nju/index.php/sji
Email: [email protected]
This work is licensed under a Creative Commons Attribution 4.0 International License.