DRYING KINETICS OF OIL PALM FROND WASTE USING SIMPLE BATCH OVEN DRYER

Abdul Halim, Bayu Triwibowo

Abstract

Drying phenomena of oil palm frond waste as agriculture waste was observed using simple batch oven dryer. The operation temperatures were 50, 80 and 120 °C. The sample of oil palm frond was weighed periodically every 30 minutes. Moisture content, shrinkage phenomena and drying kinetic model were investigated to the difference operation temperature. Experimental result exhibited that temperature influent significantly to the drying rate. The water transport controlled by diffuse mechanism. Shrinkage occurred in radial direction and decreased the size to almost 65% from initial size. In longitudinal direction almost is not change of size.

 

Keywords

batch oven dryer, drying kinetics, oil palm frond.

Full Text:

PDF

References

Ayadi, M., Mabrouk, S. B., Zouari, I., Bellagi, A., (2014), Kinetic Study of the Convective Drying of Spearmint, Journal of the Saudy Society of Agricultural Sciences, 13, pp. 1-7

Badan Pusat Statistik, (2015), URL: http://www.bps.go.id/webbeta/frontend/linkTabelStatis/view/id/1671, accessed at 20 February 2015 (in Indonesia)

Correia, P. M. R. R., Andrade, S., Guiné, R. P. F., (2013), Modeling of Drying Kinetics of Chestnut, In: Proceeding of the World Congress on Engineering Vol II, London, 3-5 July, UK, pp. 1359-1363

Fudholi, A., Sopian, K., Alghoul, M. A., Ruslan, M. H., Othman, M. Y., (2015), Performances and Improvement Potential of Solar Drying System for Palm Oil Fronds, Renewable Energy, 78, pp. 561-565

Goh, C. S., Tan, H. T., Lee, K. T., Mohamed, A. R., (2010), Optimizing Ethanolic Hot Compressed Water (EHCW) Cooking as a Pretreatment to Glucose Recovery for the Production of Fuel Ethanol from Oil Palm Frond (OPF), Fuel Processing Technology, 91, pp. 1146-1151

Hussin, M. H., Rahim, A. A., Ibrahim, M. N. M., Perrin, D., Yemloul, M., Brosse, N., (2014), Impact of Catalytic Oil Palm Fronds (OPF) Pulping on Organosolv Lignin Properties, Polymer Degradation and Stability, 109, pp. 33-39

Kelly-Yong, T.L.; Lee, K.T.; Mohamed, A.R.; Bhatia, S., (2007), Potential of Hydrogen from Oil Palm Biomass as a Source of Renewable Energy Worldwide, Energy Policy, 35, pp. 5692-5701

Kemp, I. C., Fyhr, B. C., Laurent, S., Roques, M. A., Groenewold, C. E., Tsotsas, E., Sereno, A. A., Bonazzi, C. B., Bimbenet, J. J., Kind, M., (2001), Methods for Processing Experimental Drying Kinetics Data, Drying Technology, 19, 1, pp. 15-34

Kudra, T. and Efremov, G. I., (2003), A Quasi-stationary Approach to Drying Kinetics of Fluidized Particulate Materials, Drying Technology, 21, 6, pp. 1077-1090

Mariani, V. C., Perussello, C. A., Cancelier, A., Lopes, T. J., Silva, A., (2015), Hot-Air Drying Characteristics of Soybeans and Influence of Temperature and Velocity on Kinetic Parameters, Journal of Food Process Engineering, 37, pp. 619-627

Mohideen, M. F., Faiz, M., Salleh, H., Zakaria, H., Raghavan, V. R., (2011), Drying of Oil Palm Frond via Swirling Fluidization Technique, In: Proceeding of the World Congress on Engineering Vol. 3, London, 6-8 July, UK, pp. 2375-2380

Ofori-Boateng, C. and Lee, K. T., (2014), Sono-assisted Organosolv/H2O2 Pretreatment of Oil Palm (Elaeis guineensis Jacq.) Fronds for Recovery of Fermentable Sugars: Optimization and Severity Evaluation, Fuel, 115, pp. 170-178

Puspasari, I., Talib, M. Z. M., Daud, W. R. W., Tasirin, S. M., (2012), Drying Kinetics of Oil Palm Frond Particles in an Agitated Fluidized Bed Drying, Drying Technology, 30, pp. 619-630

Rahaman, M. N., (2003), Ceramic Processing and Sintering 2ed, Marcel Dekker, Inc. New York USA, pp. 129

Rahman, M. M., Lourenco, M., Hassim, H. A., Baars, J. J. P., Sonnenberg, A. S. M., Cone, J. W., De Boever, J., Fievez, V., (2011), Improving ruminal degradability of oil palm fronds using white rot fungi, Animal Feed Science and Technology, 169, pp. 157-166

Ressel, J. B., Sixta, H. (Eds), (2006), Wood Yard Operations, In: Handbook of Pulp, WILEY-VCH Verlag GmbH &Co, Germany, pp. 26

Singh, A. P. and Singh T., (2014), Biotechnological Applications of Wood-rotting Fungi: A Review, Biomass and Bioenergy, 62, pp. 198-206

Zahari, M. A. K. M., Ariffin, H., Mokhtar, M. N., Salihon, J., Shirai, Y., Hassan, M. A., (2015), Case Study for a Palm Biomass Biorefinery Utilizing Renewable Non-Food Sugars from Oil Palm Frond for the Production of Poly(3-hydroxybutyrate) Bioplastic, Journal of Cleaner Production, 87, pp. 284-290

Zainuddin, Z., Daud, W. R. W., Pauline, O., Shafie, A., (2011), Wavelet Neural Networks Applied to Pulping of Oil Palm Fronds, Bioresource Technology, 102, pp. 10978-10986

Refbacks

  • There are currently no refbacks.