Development of E-Module for Construction Management Application Course Based on Building Information Modeling
Abstract
The rapid demands of technological development in the construction world require competent and skilled human resources to operate BIM-based software. One of the university's efforts to address this is by adopting Building Information Modeling in one of the lecture teaching materials, one of which is the Construction Management Application Course. The research and development aim to produce e-modules Building Information Modeling-Based Construction Management Application Course at the Building Engineering Education Study Program, Universitas Negeri Jakarta. The method used in this study is the Research and Development by using a 4D model. The 4D model consists of 4 systematic stages: define, design, development and Dissemination. Based on the validation results, the developed e-modules fall into the very feasible category with 82% of material experts and 93% of media experts. Limited trial results and Dissemination of N-gain values of 0.65 (moderate) and 0.75 (high) show learners' cognitive improvement. Along with the respondents' questionnaire results, the percentage of practicality was 90.2%, which falls into the Very Practical category. Based on the advantages processed, the Construction Management Application e-module regarding the procedures of making 4D and 5D simulations in 2-story house buildings using Autodesk Navisworks software is suitable as advanced teaching materials in the Construction Management Application course.
Keywords
Full Text:
PDFReferences
Abdirad, H. & Dossick, C. S. (2016). BIM curriculum design in architecture, engineering, and construction education: a systematic review. Journal of Information Technology in Construction (ITcon), 21(17), 250-271.
Cavus, N., & Alhih, M. S. (2014). Learning Management Systems Use in Science Education. Procedia - Social and Behavioral Sciences, 143, 517–520.
Andrey, A., & Maulana, A. (2021). Pengembangan Bahan Ajar E-Modul Mata Kuliah Gambar Teknik Ii Di Prodi Pendidikan Teknik Bangunan. Jurnal Pensil: Pendidikan Teknik Sipil, 10(3), 160-165.
Arvinda, M. N. (2020). Pengembangan E-Modul Berbasis Scaffolding Dengan Modular Object Oriented Dynamic Learning Environment (Moodle) Pada Materi Momentum Impuls Dan Getaran Harmonis Kelas X SMA/MA.
Berlian, C. A. (2016). Perbandingan Evisiensi Waktu, Biaya dan Sumber Daya Manusia Antara Metode BIM dan Konvensional (Studi kasus: Perencanaan Gedung 20 Lantai). Jurnal Karya Teknik Sipil, 5(2), 220-229.
Charlton, S. G., & O'Brien, T. G. (Eds.). (2019). Handbook of human factors testing and evaluation. CRC Press.
Dong, R. R. (2017). The application of BIM technology in building construction quality management and talent training. Eurasia Journal of Mathematics, Science and Technology Education, 13(7), 4311-4317.
Fadzil, A. I. M., & Yahya, M. Y. (2021). Pelaksanaan Sistem Pemodelan Maklumat Bangunan (BIM) Bagi Mengurangkan Kos Dalam Pengurusan Fasiliti. Research in Management of Technology and Business, 2(1), 892-904.
Fausih, M., & Danang, T. (2015). Pengembangan media e-modul mata pelajaran produktif pokok bahasan “instalasi jaringan lan (local area network)” untuk siswa kelas xi jurusan teknik komputer jaringan di smk nengeri 1 labang bangkalan madura. Jurnal Unesa, 1(01), 1-9.
Hamid, M. A., Aribowo, D., & Desmira, D. (2017). Development of learning modules of basic electronics-based problem solving in Vocational Secondary School. Jurnal Pendidikan Vokasi, 7(2), 149.
Hanifah, Y. (2016). Awareness dan Pemanfaatan BIM : Studi Eksplorasi. Temu Ilmiah IPLBI 2016, August, 49–54.
Hutama, H. R., & Sekarsari, J. (2018). Analisa faktor penghambat penerapan building Information modeling dalam proyek konstruksi. Jurnal Infrastruktur, 4(1), 25-31.
Jrade, A., & Lessard, J. (2015). An integrated BIM system to track the time and cost of construction projects: a case study. Journal of Construction Engineering, 2015(3), 1-10.
Kibble, J. D., Bellew, C., Asmar, A., & Barkley, L. (2016). Team-based learning in large enrollment classes. Advances in physiology education, 40(4), 435-442.
Laorent, D., Nugraha, P., & Budiman, J. (2019). Analisa Quantity Take-Off dengan Menggunakan Autodesk Revit. Dimensi Utama Teknik Sipil, 6(1), 1-8.
Lindblad, H. (2013). Study of the implementation process of BIM in construction projects.
Liu, S., Xie, B., Tivendal, L., & Liu, C. (2015). Critical barriers to BIM implementation in the AEC industry. International Journal of Marketing Studies, 7(6), 162.
Pitake, S. A., & Patil, P. D. S. (2013). Visualization of construction progress by 4D modeling application. International Journal of Engineering Trends and Technology (IJETT), 4(7), 3000-3005.
Pratama, R. B., & Fikriyah, T. R. (2021). Pengembangan E-Modul Bemuatan Kearifan Lokal pada Pembelajaran Tematik di Kelas V SDN 2 Waruroyom. Jurnal Kreatif: Jurnal Kependidikan Dasar, 11(2), 127-136.
Purnomo, L. A. (2017). Penerapan E-Modul Berbasis Problem Based Learning (PBL) Sebagai Upaya Peningkatan Hasil Belajar Siswa Pada Mata Pelajaran Gambar Konstruksi Bangunan Kelas XI TGB SMK Negeri 1 Sidoarjo. Jurnal Kajian Pendidikan Teknik Bangunan, 2(2/JKPTB/17).
Ramadhan, M. A., & Maulana, A. (2020). Pemahaman Konsep BIM melalui Autodesk Revit bagi Guru SMK Teknik Bangunan se-Jabodetabek. Wikrama Parahita: Jurnal Pengabdian Masyarakat, 4(1), 47-52.
Ramadhan, M. A., Maulana, A., Kusumarini, A., Apriliany, A., Haryani, M. P., Rismana, E., & Rizky, D. M. (2020). Pemanfaatan Learning Management System (LMS) Bagi Guru Smk Desain Pemodelan Dan Informasi Bangunan Di Kab/Kota Bekasi. Sarwahita, 17(02), 193–200.
Telaga, A. S. (2018). A review of BIM (Building Information Modeling) implementation in Indonesia construction industry. IOP Conference Series: Materials Science and Engineering, 352(1).
Refbacks
- There are currently no refbacks.
