Performance Analysis of Power Bank Fitted with Recycled Laptop Batteries
Abstract
The result of observation at Science Laboratory of State Vocational High School 3 of Surakarta shows that the power capacity of power bank fitted with recycled laptop batteries was not tested. Power bank test was conducted by preparing used laptop batteries type 18650 from its packaging for a total of five cells, selecting batteries based on their physical appearance, cleaning the pole connections, testing the voltage, testing temperature when power charging from electric outlet to power bank, testing the power drain, testing the power capacity without load, charging in the case, testing the module when power charging from electric outlet to power bank, testing the power capacity level indicator, testing power charging from power bank to recharged device, installing the power bank analyzer, and recording voltage measurement results, electric current flowing, duration of time needed to charge, and power capacity left after charging. The electric load used was a 1.2 watt LED lamp. After that, the calculation of battery power capacity was conducted, in accordance with the technical specification listed in the power, then compared to the result of test of power capacity stored in recycled power bank. Based on the result of technical specification calculation, the power bank produced had a power capacity of 50.000 watt hours. Meanwhile, in the experiment with LED lamp electric load, the power bank had a power capacity of 44.6756 watt hours. The comparison of power capacity between the technical specification and the experiment shows that the recycled power bank had performance of 89.4%. Thus, recycled power bank met the requirement of feasibility to be learning media of physics project.
Keywords
Full Text:
PDFReferences
Blumberga, A., Timma, L., Romagnoli, F., & Blumberga, D. (2015). Dynamic Modelling of A Collection Scheme of Waste Portable Batteries for Ecological and Economic Sustainability. Journal of Cleaner Production, 88, 224–233.
Boyden, A., Soo, V. K., & Doolan, M. (2016). The Environmental Impacts of Recycling Portable Lithium-Ion Batteries. Procedia CIRP, 48, 188–193.
Ecker, M., Nieto, N., Kabitz, S., Schmalstieg, J., Blanke, H., Warnecke, A., & Sauer, D. U. (2014). Calendar and Cycle Life Study of Li(Nimnco)O2-Based 18650 Lithium-Ion Batteries. Journal of Power Sources, 248(1), 839–851.
Fu, Y., Lu, S., Li, K., Liu, C., Cheng, X., & Zhang, H. (2015). An Experimental Study on Burning Behaviors of 18650 Lithium Ion Batteries Using A Cone Calorimeter. Journal of Power Sources, 273(1), 216–222.
Gifary, S. (2015). Intensitas Penggunaan Smartphone Dan Perilaku Komunikasi (Studi Pada Pengguna Smartphone di Kalangan Mahasiswa Program Studi Ilmu Komunikasi Universitas Telkom). Jurnal Sosioteknologi, 14(2), 143-148.
Hidayat, H. (2015). Production based Learning: An Instructional Design Model in the Context of Vocational Education and Training (VET). Procedia-Social and Behavioral Sciences, 204(1), 206-211.
Kalmykova, Y., Berg, P. E.-O., Patrtricio, J., & Lisovskaja, V. (2017). Portable Battery Lifespans and New Estimation Method for Battery Collection Rate Based on A Lifespan Modeling Approach. Resources, Conservation and Recycling, 120(2), 65–74.
Keil, P., & Jossen, A. (2016). Charging Protocols for Lithium-Ion Batteries and Their Impact On Cycle Life-An Experimental Study With Different 18650 High-Power Cells. Journal of Energy Storage, 6(2), 125–141.
Kornbluth, K., Pon, B., & Erickson, P. (2012). An Investigation of The Cost and Performance of A Solar-Powered LED Light Designed as an Alternative to Candles in Zambia: A Project Case Study. Renewable and Sustainable Energy Reviews, 16(9), 6737–6745.
Lei, C. U., So, H. K. H., Lam, E. Y., Wong, K. K. Y., Kwok, R. Y. K., & Chan, C. K. (2012). Teaching Introductory Electrical Engineering: Project-Based Learning Experience. In Teaching, Assessment and Learning for Engineering (TALE), 2012 IEEE International Conference on (pp. H1B-1). IEEE.
Love, C. T., Virji, M. B. V, Rocheleau, R. E., & Swider-Lyons, K. E. (2014). State-of-Health Monitoring of 18650 4S Packs with a Single-Point Impedance Diagnostic. Journal of Power Sources, 266, 512–519.
Machin, A. (2013). Implementasi Pendekatan Saintifik, Penanaman Karakter dan Konservasi pada Pembelajaran Materi Pertumbuhan. Jurnal Pendidikan IPA Indonesia, 2(2), 203–208.
Margareta, R., Dwi, L.S., Tsabit, A.A. (2011). Pengembangan Bahan Ajar Pendidikan Lingkungan Hidup Berkarakter di Universitas Negeri Semarang. Semarang: Unnes Press.
Pavaloiu, I.-B., Petrescu, I., & Dragomirescu, C. (2015). Interdisciplinary Project-Based Laboratory Works. Procedia-Social and Behavioral Sciences, 180(1), 1145–1151.
Refbacks
- There are currently no refbacks.
