Rekayasa: Jurnal Penerapan Teknologi dan Pembelajaran

Focus and Scope

REKAYASA journal publishes exciting articles from all fields of research and Engineering Science. The journal's primary focus is on research practice and engineering processes utilizing biomass or factory waste. The engineering journal is an open-access peer-reviewed journal that publishes articles from all areas of Engineering and Science research.

REKAYASA Journal approaches practical research and aims to build a platform for Researchers and Academics for all critical aspects of Engineering and science.

The scope of REKAYASA Journal is to provide research media and essential references for the advancement and dissemination of research results that support high-level research in the fields of Engineering and Science. Original theoretical studies and application-based studies contribute to better understanding in all fields of Engineering and Science.

Online Submissions

Registration and login are required to submit items online and to check the status of current submissions.

Author Guidelines

Download Template

General Information

Journal is published twice a year; the number of the volumes will vary. Journal will be produced after going through reviewing process from the board of editor. Staring from Rekayasa Vol 18 No 1, 2020, we only published article in english language. The article could be based on research, scientific studies, and analysis as well as the solution which are relevant with the field of application technology, especially about field in engineering. The article should never been published before.

Specific Information

The article should be written in A4 paper. The article should be without any page numbering and composed as follows: Abstract, Introduction, Research Methodology ( or Model Development), Result and Discussion, Conclusion, Acknowledgements (if any), List of Notation (if any), and Bibliography

The article begins with a title using font 17 pt UPPER CASE format. Name of the author written under the title using font 13 pt without any academic degree. Apostrophe put behind the name of the author using a superscript format. The name of the institution (name of the institution, address, phone number, fax number, and e-mail) written under the name of the author using Times New Roman 8pt. Should there are more than one author, please add the e-mail address of the corresponding author. The title of the article, name of the author, and name of the institution written in the center of the field. Space between the title and the name of the author is one single space 12 pt and space between the name of the author and the name of the institution is one single space 8 pt.

Abstract

The abstract should be written in English, ranging between 200  300 words. The title of the abstract should be written in the center of the field using regular font 9 pt bold. The space between the title of the abstract and the name of the institution is one single space 10 pt. The space between the text of the abstract and the title is one single space 11 pt. The abstract is written using regular font 9 pt in a single column format. Keywords are written below the text of the abstract, arranged alphabetically, and separated by a comma. The title of the keywords should be written using italic font 8 pt, while the keywords should be written using regular font 8 pt.

Content

Content of the article should be written left aligned with the left margin 3 cm, right margin 3 cm, bottom margin 3,98 cm, and top margin 3,98 cm. The space between the header and the page of the paper is 20 mm, and the space between the footer and the edge is 13 mm. The article should be written using MS Word using Times New Roman using 12 pt font, 1.5 space, and in a single-column format. Each article should be no more than 20 pages (including pictures and tables) justified and should end in an even page number.

Sub Heading

Sub Heading should be written in a bold letter using UPPER CASE format, aligned to the left, and numbered. The subheading should be written using a bold letter, aligned left without number, and underline.

Pictures and Tables

Pictures and tables placed in a text with description. Pictures and tables are followed by the title of the picture placed just below the picture and the title of the table placed above the table. The title of the table and picture should be numbered. The picture should be able to be clearly printed. Pictures or diagrams/ schemes placed in the text or if the picture is too big, it can be placed in the middle of the page. The picture should not be framed. The displayed tables are without the vertical lines, whereas horizontal lines can only display 3 main horizontal lines which are 2 horizontal lines for column title and closing line from the bottom line.

Equation

The equation should be written left aligned and numbered in the brackets. The numbers placed at the end of the right margin of the column.

List of Notation

List of Notation arranged alphabetically. Notation of the Latin alphabet should be written first followed by the Arabic alphabet.

Quotation

Quotation writing of an article should be written using the Harvard system. The source is written in the description consists of the name of the author and the year of publication. Example: Hidrolisis lignocellulose Dapat dilakukan dengan enzim dan kimia (Megawati, 2009 for one author; Megawati & Rengga, 2011 for two authors and Rengga et al., 2010 for three or more authors). According to Damayanti (2008), 

Bibliography

The Bibliography should be arranged alphabetically without any numbering and space between each item 1.5 space. The rules of bibliography writing are as follows:

Garside, J., Al-Dibouni, M.R. 1998.Velocity-Voidage Relationships for Fluidization in Solid-Liquid System. Industrial Engineering Chemistry Process Design and Development. 16(1), 206-214.

Molerus, O. 1993. Principles of Flow in Disperse Systems. 1st Ed. Chapman & Hall. London.

Setyawan, H. 1996. Flow Patterns of Coal  Water Moxture in an Agitated Tank. Master Thesis. Tokyo Institute of Technology. Tokyo. Japan.

Primack, H.S. 1983. Method of Stabilizing Chelated Polyvalent Metal Solutions. U.S. Patent No. 4,455,287. Issued 19 June 1984.

Hovmand, S. 1995. Fluidized Bed Drying, in A.S. Mujumdar (Ed.). Handbook of Industrial Drying, 2nd Ed. Marcel Dekker. New York. 195-248.

Sasaki, K. Noparatnaraphorn, N., Nagoi, S. 1991. Use of Photosynthetic Bacteria for The Production of SCP and Chemicals from Agro Indusrial Waste.in Martin, AM (Ed.) Bioconversion of Waste to Industrial Product. Elviser Applied Science. London. 225-233.

Copyright Notice

The copyright of the received article shall be assigned to the journal as the publisher of the journal. The intended copyright includes the right to publish the article in various forms (including reprints). The journal maintains the publishing rights to the published articles.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

##manager.payment.authorFees##

This journal charges the following author fees.

Article Submission: 0.00 (IDR)

Fast-Track Review: 0.00 (IDR)

Article Publication: 500000.00 (IDR)

If you do not have funds to pay such fees, you will have an opportunity to waive each fee. We do not want fees to prevent the publication of worthy work.